Heat transfer fluid.
The collector is not in direct contact with the water in the conduit, but conducts heat energy to the condensing end through the conductive liquid, and the condensing end conducts the thermal energy in the duct, which also prevents the duct from generating scale. The water heater conductive fluid is a professional antifreeze agent and can be used normally under low temperature conditions. It can produce heat in two minutes under the sun.
Detailed information:
Note:
When taking a bath, if the water in the solar water heater is used up and the person has not rinsed, you can run cold water for a while. a few minutes and use the cold water to flow, the principle of hot water floating up, push the hot water into the tube toempty and you can continue taking a bath.
After the water heater is installed and fixed, non-professionals should not move or disassemble it easily to avoid damage to key components. No debris should be placed around the water heater to eliminate the risk of hitting the vacuum tube. . Check the exhaust holes regularly to avoid inflation or deflation of the water tank, when cleaning the vacuum tube regularly, be careful not to damage the lower end of the vacuum tube. For solar water heaters equipped with auxiliary electric heating devices, take special care. should be paid to the water supply to avoid dry burning without water.
Baidu Encyclopedia - Wall Mounted Solar Water Heater
It is best to make necessary modifications to the pipes of the existing system and leave a gap at the highest point of the system. pipelines This type ofThe port can also be used as an exhaust port.
For solar water heater products that need to add a certain fluid into the pipeline, the manufacturer usually does not reserve such a port in the product itself, but will certainly provide it in the instructions of the product. installation and use of the product. Install instructions to reserve ports for this purpose.
It is recommended to refer to these instructions.