Photovoltaic brackets are an important part of solar photovoltaic power generation systems and are mainly used to support and fix solar photovoltaic modules. Its functions include:
1. Support photovoltaic solar modules: Photovoltaic brackets can provide a stable support structure to fix photovoltaic solar modules in the appropriate position to ensure that they can work normally.
2. Adjust the angle of the photovoltaic module: By adjusting the angle of the photovoltaic bracket, the tilt angle of the solar photovoltaic module can be optimized to maximize the reception of solar radiation and improve the efficiency of power generation.
3. Resist wind and seismic forces: Photovoltaic supports have good structural strength and can withstand wind and seismic forces, ensuring stability.and safety of photovoltaic solar modules in extreme weather conditions.
Case study of photovoltaic support for color steel tile roof
4. Easy maintenance and cleaning: The design of the photovoltaic bracket can make it easier for maintenance personnel to inspect, clean and repair solar photovoltaic modules. and maintain the normal operation of photovoltaic modules.
5. Provide cable ducts: PV racks usually also provide cable ducts to transmit the energy generated by the solar PV modules to the inverter or grid.
In short, the function of the photovoltaic bracket is to provide support and fixation to the photovoltaic solar modules, adjust the angle to maximize the reception of solar radiation, resist the forces of wind and earthquakes, facilitate maintenance and cleaning, et provide cable ducts.
How to wrap external solar water tank with color steel tiles
The steel tile installation method of color to release solar energy in case of bungalow leakage: Firstly, use the steel cable to fix the solar energy; then use a steel angle to fix the solar, one end is anchored to the solar and the other end is anchored or welded to the steel parapet if there is one; no parapet, you can first put 4 pieces of concrete at the bottom of the bungalow, with a specification of 400X400X400, then put the solar. Simply attach it to concrete with expansion bolts.
Solar Energy:
Solar energy is a renewable energy source. It refers to the radiant thermal energy of the sun (see the three modes of propagation of thermal energy: radiation), and its principleipal manifestation is often called solar rays. Nowadays, it is typically used to generate electricity or provide energy for water heaters. Since the birth of life on earth, it has relied primarily on thermal radiation energy provided by the sun. Since ancient times, humans have also known how to use sunlight to dry objects and use it as a method of making food, such as crafting. salt and dry the salted fish.
1. Firstly, there are screw holes at the bottom of the four legs of the solar bracket. You can drill holes in the colored steel tiles and use screws to fix the solar. and colored steel tiles together.
2. Then use four steel cables to tie the four legs of the solar power and fix them respectively in the four directions of the roof. Use expansion hooks to attach the legsto complement the color of the steel. tiles wrapping the external solar water tank.
3. Finally, when working on the colored steel roof, you should pay attention to safety and take precautions. Protective measures should be taken to avoid slipping from the roof.