(1)
The angle between the collector
and the front wall is 10 to 15°, (2) the outlet end of the collector is 1 2 cm higher than the other end, (3)
Wall socket
There must be an upward slope of 3 to 5° from the outside towards the room, (4) The collector and
Between the water tanks
The pipes should not be too long and should not have reverse slopes. For specific content, please refer to “Siji Muge Construction Specifications”
Should high-rise solar water heaters be installed on balconies? Where is the best place to install high-rise solar water heaters? h3>
Hot water system expert-Siji Muge Tips: ① The angle of the bracket and row spacing of the heat sensor solar heat pump should be placed strictly according to the design ② The rigidity, strength and anti-corrosion performance of the solar collectore ; the support must meet security requirements; ③ The solar collector bracket should be installed on the base according to the design requirements, firmly fixed to the main structure ④ The solar collector bracket is installed in place, bolts, nuts and washers are all; missing and tight, and the bracket does not shake; ⑤ The solar collector bracket must be adjusted before tightening, and the diagonal size of the bracket is not more than 3mm, and the height deviation of the east and west sides is not greater. greater than 2 mm; ⑥ The front and rear rows of supports of the solar collector must be connected with each other to form a whole, and the front and rear rows of supports must be reliably fixed to the building to ensure that the supports are integrated. strength requirements.
1. High-rise residences can generally choose "balcony hanging" solar energy, which is solar energyire relatively light. All major solar manufacturers have this model. It is not reasonable to install our common solar energy. Firstly, high-rise residential buildings generally do not have a passage to the top floor reserved in the wall. The second real estate management would not agree because the wind on the top floor is stronger and more dangerous.
2. What are the precautions when installing balcony wall-mounted solar water heaters in high-rise buildings:
Before installation, first choose the installation location and ensure Please note that the installation location of the solar water heater is not a place of activity for residents. The installation site Meets product requirements For example, the wall for suspended installation must be a solid wall with a thickness >250px. liters, it is better to install stronger supports.
AndSince the water tank and the collector are separated, the collector can be "embedded" in sunny places such as balconies and walls, and the water tank can be placed in the kitchen, bathroom , etc. The water supply and drainage being indoors, the water heater no longer fears the intense cold in winter. It has many advantages such as wind protection, antifreeze and high thermal efficiency. It considerably reduces building constraints. the use of solar water heaters and makes it comfortable to use. In appearance, the collector is organically integrated into the building. While neat and beautiful, it avoids the dangerous factors caused by installing traditional solar water heaters on the roof of the building. And because the water tank is very close to the water outlet. , it saves water while saving water and greatly improves the water utilization rate chaude.