The installation steps are as follows:
1. Open the side cover of the water tank of the solar water heater. is a cover on the side of the water heater that can be opened with a screwdriver or wrench.
2. You will see the heating rod inside the water tank.
3. There will be an opening for a hex nut. Using an adjustable wrench, turn the nut counterclockwise to loosen it. Remove the heating rod from the opening.
4. Fill the newly dug insulating material (insulating polyurethane) into the opening to ensure safe insulation of the heating rod.
The Siji Muge solar electric heating rod is on the left side of the water tank.
For the location of the Four Seasons Muge solar heating rod, you need to drain the water from the water tank, open the side cover of the water tank and remove the insulation tearmic. polyurethane in the lower third of the side cover. Usually it has an opening for hex nut. When you take it apart, you can see the heating rod.
Electric heating is the induction heating equipment with the highest efficiency, fastest speed, low consumption, energy saving and environmental protection for heating metallic materials. Electric heating is also known as high frequency heating machine, high frequency induction heating. high frequency induction heating equipment and devices, high frequency heating power supplies, high frequency power supplies, high frequency electric furnaces.