Install the solar water heater first and install a water bucket at the easy water outlet.
Solar energy refers to the energy of thermal radiation from the sun (see the three modes of propagation of thermal energy: radiation). Its main manifestation is often called solar rays. Nowadays, it is typically used to generate electricity or provide energy for water heaters. Since the birth of life on earth, it has relied primarily on thermal radiation energy provided by the sun. Since ancient times, humans have also known how to use sunlight to dry objects and use it as a method of making food, such as crafting. salt and dry the salted fish. With the decline of fossil fuels, solar energy has become a significant part of human energy consumption and continues to grow. There are two ways to use energye solar: photothermal conversion and photoelectric conversion. Solar power generation is an emerging renewable energy source. Solar energy in a broad sense also includes wind energy, chemical energy, hydropower, etc. on earth.
General pressureless solar energy relies on natural gravity to discharge water, that is, the solar energy is at a high place, the water point is at a low place and the water outlet hole on solar energy. The energy is open at the bottom of the bucket or lower side; if for pressure type, the water inlet is usually at the bottom and the water outlet is at the top. This is only when pressurized water enters. the water in the water tank is expelled.
If you are making a simple water tower for cold water, you just need to open a water inlet hole on the upper part of one side of the water tank, to add a float valveinside, then install at the bottom or below (preferably on the side) 2-3 cm from the bottom) to open a water outlet and install a maintenance valve. If the water tank you build needs to contain hot water, it is best that the water inlet goes directly to the bottom of the water tank and the water outlet is open at the bottom of the side with a solar hot dog inside to ensure the hottest water can be used.