It is best not to install solar energy on colored steel tiles, because solar energy is too heavy after water is supplied, and the bearing capacity of colored steel tiles is relatively small and can easily collapse. Second, even if it is not crushed, it is not easy to repair. When strong winds hit, solar energy can be easily knocked down.
Colored steel tiles, also known as colored profile tiles, are profiled sheets made of colored steel plates that are cold rolled and bent into various corrugated shapes. They are suitable for industrial and civil applications. buildings, warehouses, roofs, walls and interior and exterior wall decorations of special buildings and large-span metal structure houses have the characteristics of light weight, high strength, rich colors, practical construction and rfast, earthquake resistance, fire protection, rain protection. , long life and maintenance-free, etc., and are now widely promoted and applied.
How to replace tiles after installing photovoltaic solar panels on the house
Solar modules can be installed on the colored steel tiles of the factory building. The following precautions should be taken:
p>
1. Factory Building Color Steel Tiles The underside of the tiles is usually made of steel purlins and steel roof trusses. When installing solar modules, the supports must be fixed on at least two steel purlins and form a fixed plane. with side supports to ensure sufficient stability under the action of horizontal loads.
2. When installing solar modules, the water supply and return pipes as well as the water linesThe signal that passes through the roof must be waterproof. The roof cannot leak due to the solar energy installation.
If you install photovoltaic solar panels on your home and replace the tiles, you must first remove the solar panels, clean the roof, and then replace the tiles.
Tiles are important waterproofing materials for roofs. They are generally made of clay, but also of cement and other materials. They have arched, flat or semi-cylindrical shapes, used to build houses. The tile colors are mainly brick red and gray. They are not only thermally insulating and rain-resistant, but also beautiful, neat and durable.
Its use began in the early Western Zhou Dynasty. In 1976, a group of large building foundations was discovered in Fengchu Village, Qishan County, pShaanxi province. Its age was determined based on the determination of radioactive carbon in charred material. wooden pillar. , the result is that at the beginning of the Western Zhou Dynasty, around 1000 BC, a small amount of tiles was found in the roof accumulation. It is assumed that they were only used on significant parts of the roof and part of the ridge. this time.
At the same time, a large-scale foundation group for a Western Zhou building was also discovered in Zhaochen Village, Fufeng, Shaanxi. Judging from the discovered pottery, the superstructure was built in the middle of the Western Zhou Dynasty. Many types of tiles in slabs, tubular tiles, there are also half tiles. The tiles are laid on the roof with their backs. Tubular tiles are covered between two rows of tiles. in front of the eaves.
There are tile nails and aTiling rings on the tiles to fix the position of the tiles. A tile fragment was found in Keshengzhuang, Fengxi, Shaanxi province. The cross section has the shape of a chevron. This could be a ridge tile used on the peak of the roof. Unfired tile blanks were also found. there is a craft workshop specializing in baking tiles. In Henan, tiles from the late Western Zhou Dynasty were also found in Wangwan, Luoyang, Dongjialin, Liulihe, Beijing and elsewhere.