A few pieces of photovoltaic sunlight cannot run an air conditioner.
Air conditioning power supply wiring requirements:
The location and number of power outlets are determined to facilitate the use of household appliances. The beauty of the interior decoration plays an important role. The arrangement of power outlets should be based on the planned positions of household appliances and interior furniture, and special attention should be paid to cooperation with relevant professionals such as building decoration to determine the correctness of the locations of the sockets. taken. The air conditioner must use a dedicated power outlet with switch. When a certain type of air conditioner is clearly used, the power socket of the air conditioner should be arranged as follows: ① The power socket of the split air conditioner should be placed 1.8m from the ground according to the reserved holeé for the socket. pipe;
②The power outlet of the window air conditioner should be installed at a distance of 1.4m from the ground next to the window;
③The power outlet of the air conditioner d The cabinet must be installed at a position corresponding to 0.3 m from the floor.
What is the product definition?
Annex 1: Types of urban housing structures and structural adjustment coefficients
Houses
Category Conditions of houses Internal and external conditions of the house Guide compensation price
(yuan/m2)
Doors and windows Floor Exterior wall Interior wall Roof Equipment
< p>Multi-layer< /p>Building
Load-bearing brick walls, prefabricated or cast in place, reinforced concrete floor slabs, stairs, balconies, reinforced concrete ring beams, structural columns, height of ground greater than 2.9 m (not including 2.9 m). Wooden doors and windows (with gauze fans) Cement floor, painted floor, wooden wallcement or mixed mortar, porcelain imitation paint, reinforced concrete floor, waterproof roof or sloping roof, complete and fluid access to water, electricity, heating and sanitation 1.10A
Second floor
Brick-concrete
(Building 1) Load-bearing brick walls, prefabricated or cast-in-place reinforced concrete floor slabs, reinforced concrete ring beams, structural columns, floor height greater than 3.0 m (3.0 m included). Plywood, plastic steel windows, wooden doors, aluminum alloy windows, floor tiles, terrazzo, high-end paint, terrazzo, imitation porcelain paint, reinforced concrete floor slabs, waterproof roof, water, electricity, heating and smooth full bathroom 1.08A
Second floor
Brick-concrete
(Building 2)
Brick wall load-bearing, prefabricated or cast-in-place reinforced concrete floor slabs, stairs, floor height less than 3.0 m (excluding 3.0 m).
Doors and windowswooden beings
(with gauze fans) Cement floor, painted floor Cement wall or mixed mortar Porcelain imitation paint Reinforced concrete floor, waterproof roof or sloping roof Full and fluid access to water, electricity , heating and sanitation 1.04 A
Brick-concrete
(Level 1) Load-bearing brick wall, prefabricated or cast-in-place reinforced concrete floor slabs, reinforced concrete ring beams , structural columns, eaves height greater than 3.0 m (including 3.0 m). A single layer exceeding 4.9 m will be counted as a double layer. Wooden doors, aluminum alloy or plastic steel windows, cement calendering, painted floors, exterior wall painting, washed stone, ordinary interior wall painting, reinforced concrete floor slabs, waterproof roof, full water, electricity and heating Based on this article A (see note after Annex 1 for explanation)
Brick-concrete
(Level 2) Load-bearing brick wall, daprefabricated or cast-in-place reinforced concrete floor slabs, reinforced concrete ring beams, structural columns, eaves height less than 3.0 m (not including 3.0 m). Wooden doors and windows (with screen fans) Cement Floor Cement mortar wall Ordinary interior wall paint Reinforced concrete floor slab, waterproof roof Water, electricity and heating complete 0.98A
Brick The wooden brick wall (flat 1) is load-bearing, with strips of wood and sandalwood, and has a reasonable structure. The height of the eaves is more than 3.0m (including 3.0m), and it is the same as the brick. -concrete. Plastic steel windows, wooden doors or wooden doors and windows (with screen fans) Cement
Cement mortar plastering of the floor
Ordinary interior wall painting Sloped roof , reed sheet, suspended gypsum tiles on the ceiling; Water, electricity and heating advice Completet 0.96A
Brick and wood
(Ping 2) Load-bearing brick wall, sandalwood strips, ordinary roof trusses, reinforced concrete sandalwood strips, simple structure, eaves height less than 3.0m (not included) 3.0m). Ordinary
Doors and windows Cement
Floor Clear water
Wall Ordinary interior wall paint Sloped roof, reed sheet, hanging tiles, brick roof, ceiling , reed leaf Water and electricity Full heating 0.94A
Single
(flat 1) Sandalwood strips or sandalwood strips in reinforced concrete, brick wall or in stone, eaves height 2.8 m or more (including 2.8 m). Simple
Wooden doors and windows Brick floor, cement floor Clear water
Wall Clear water wall Tile roof With 0.92A lighting
Simple (flat 2) Wooden sandalwood strips Or reinforced concrete sandalwood strips, simple structure, broken bricks, stone or rammed earth walls, eaves height greater than2.2 m and less than 2.6 m (excluding 2.6 m). Poor
Wooden doors and windows, brick paving, clay floor, single roof, 0.9A lighting installations
Note: A: General products are developed in depending on the location of the demolished houses in the demolition project at the time of publication of the announcement. If the average price of the building is the average price of the relocated building, one of the new 100% brick-concrete bungalows to be demolished will be replaced by one.
Appendix 2: Adjustment coefficient for multi-storey residential buildings
Story One storey Two storeys Three storeys Four storeys Five storeys Six storeys
Adjustment< /p>
Coefficient 1.02 1.06 1.06 1.06 0.96 0.88
Appendix 3: Orientation adjustment coefficient for residential houses
Adjustment towards south, east, west, north
Coefficient 1.01 1.0 1.0 1.0
Annex 4: New orientation standards for assessment of the housing structuret urban
Housing
Category Project category Standards and conditions
In good condition (1.0) Generally in good condition (0.95) Moderately damaged (0.9) Severely damaged (0.85)
Brick
Mixed
< p>StructureMain structure
< p>BodyConditions Foundation No uneven settlement Slightly unevenUniform settlement Uneven settlement occurs, slightly affecting the upper structure. Obvious settlement affects the upper structure, deformation and cracking.
Bearing wall (load-bearing part) straight, without inclination, without cracks, without weather damage. , plastering A small amount of cracks. Some cracks, alteration of mortar joints and other damage. Severe cracks, bulges and other damage.
Prefabricated floor slab. joints. Slight cracks in the joints. Some of the seam caulking material has fallen off, causing severe hollowing, shelling and poncings.
Other
Other
pieces
The roof has no leaks Leak Slightly cracked shell Partial leak Significant leak
p>
Floor No cracks, no damage Slight cracks, sanding Partial cracks, hollows, peeling Significant hollows, peeling, sanding
Interior and exterior
Walls There are no no hollows on the coated surface, the color is uniform, the tiles do not flake and the grouting mortar is dense. There are slight cracks. and hollows on the plastered surface. Some pits and cracks on the plastered surface, and some tiles are peeling off. The plastered surface is seriously hollow.
The doors and windows are intact, the switches. are flexible, the glass and hardware are complete and the paint is not peeling, there is a small deformation, the glass and hardware are partially damaged and the paint is tarnished, the wood is corroded or the doors and windows are in steel. arerusty, switches are stiff, a small amount of glass and hardware is missing, paint is aged, tenons are loose, cracked, wood is rotten, steel doors and windows are heavily rusted, switches are generally stiff . , glass and hardware are missing and paint is peeling.
The water, electricity and sanitary equipment are in good condition and are in normal use. The equipment is basically in good condition, but some parts are damaged. Water and sanitary equipment are corroded, some parts are damaged. and incomplete, the wires are partially aged and a small number of lighting devices are damaged. Water and sanitary equipment are corroded, leaking, parts are damaged and incomplete, wiring is aging and installations are incomplete.
House
Category Project category Standards and conditions
In good condition (1.0) Virtually intact (0.95) Moderately damaged (0.9) Severely damaged (0.85)
Brick
Wood
Structure
Main structure
Conditions Load-bearing parts: The beams, columns, walls, boards and roof trusses are straight and firm, without inclination or deformation. The beams, columns and walls have slight cracks, in wood. components are slightly warped and tilted, individual nodes are slightly loose, and brick walls are slightly weathered. The beams, columns and walls are slightly inclined. They are corroded and cracked. are cowardly. The iron parts are slightly rusty. Beams, columns and walls are severely tilted, sagging, cracked, corroded, joints are loose and tenons are cracked or broken, iron parts are heavily rusted.
Others.
Conditions Tiles overlap evenly, tile heads are neat, no leakage, noof broken tiles A small number of broken tiles, slight leaking Leaks Some tiles are damaged, broken and leaking. The tiles are weathered, broken and seriously. leak.
Floor No cracks, no damage Slight cracks and sand Partial cracks, significant hollows and detachments, sanding.
Interior and exterior walls. The surface of the wall is smooth, without damage and peeling. The wall surface has slight dents, cracks and peeling, and the brick wall is slightly weathered. The wall surface is partially hollow, cracked, weathered and peeling. is badly damaged, cracked and peeling.
Doors and windows Complete and intact, switch is flexible, glass and hardware are complete, paint is not peeling. There is a small deformation, the. the switch is not flexible, the glass and hardware are slightly damaged, and the paint is dull. Parts are loose, cracked, rotten, interruptedUptors are stiff, paint is aged, glass and hardware are damaged, parts are loose, cracked, warped, switches are generally stiff, glass and hardware are damaged, and paint is peeling.
The ceiling is not damaged or damaged. No deformation, no degradation, slightly loose, incomplete, partially corroded, cracked, corroded, rotten, cracked.
Water, electricity and sanitary equipment are in good condition. and used normally. The equipment is basically intact, with some parts damaged. Water and sanitary equipment are rusty and some parts are incomplete, wires are partially electrified, a small number of lighting fixtures are damaged, water and sanitary equipment are rusty. , leaks, parts are damaged and incomplete, lighting circuits are aged and fixtures are incomplete
Easy
Easy
p >House
Main body of the house
Conditions Load-bearing wall Straight, no inclination, no play Some cracks, deformation, inclination, play Some cracks, inclination Other conditions Tiles overlap closely and have no missing corners. A little. number of tiles Broken, chipped, altered and showing slight leaks. Some of the tiles are damaged, broken and the roof tiles no longer have grooves, are damaged, broken and have serious leaks.
The floor is. smooth and without cracks. There are cracks, weathering and slight leaks. Spalling Partial hollows, cracks, weathering and spalling. Serious damage, cracks, chipping.
Doors and windows Complete and flexible opening and closing, full glass. and hardware Slight warping, stiff opening and closing, a small amount of missing glass and hardware Partial loosening, warping, cracking, warping, general stiffness of switches, peeling paint, and incomplete glass and hardware Loosening, cracking, warping, general stiffness glass and hardware. switches, peeling paint and incomplete glass and hardware.
Plumbing, lighting and lighting equipment are in good condition and are in normal use. The equipment is basically in good condition, but some parts are damaged. the water pipes are rusty, the lighting circuits are partially aged and some fixtures are incomplete. The water pipes are heavily rusted and leaking, the lighting circuits are aging and the appliances are incomplete.
Appendix 5:The lifespan of urban houses New guidance standards for evaluation
Years
Durability of structures over 35 years 31-35 years 26-30 years 21-25 years 16-20 years 11-15 years 6-10 years 5 In the year
Brick-concrete structure (steel-concrete)
Fifty-year structure 6.0 6.5 7.5 8.0 8.5 9.0 9.5 10
Brick-wood structure forty years 6.0 6.5 7.0 7.5 8.0 9.0 9.5 10
Ten years for civil structures (replaceable components are relaxed at 25 years) 6.0 (over 21 years) 7.0 8.0 9.0 10
Explanation: 1. The house has been renovated (major), if the house structure type is changed, the house should be assessed as new based on the house structure type changed, and the date of renovation (major) repair can be taken as the date of construction.
2. The comparative table of novelty (upper limit) of demolished houses is the highest value of novelty evaluation.
3. The projectRenovation refers to a project that must be completely dismantled, designed and rebuilt. The renovated house must meet the requirements of the intact house standard. Overhaul projects refer to projects that require the removal or removal of some of the major components, but do not require complete removal. Homes that have undergone major repairs meet the requirements of the substantially intact or intact standards.
4. If the decoration of the demolished houses does not meet the quality standards and requirements, the surplus or deficit may be taken into account in the overall assessment, but it must not exceed ± 3% of the base price of the compensation. .
5. This standard is formulated with reference to the national evaluation specification GB/T50291-1999.
Appendix 6: Correspondence table of the Chengxin adjustment coefficient
Chengxin 10.0 9.90 9.80 9.70 9.60 9.50 9.40 9.30 9.30 9.20 9.10
Adjustmentt
Coefficient 1.060 1.057 1.054 1.051 1.048 1.045 1.042 1.039 1.036 1.033Chengxin 9.00 8.90 8.80 8.70 8.60 8.5 8.40 8.30 8.20
< p>Ad adjustmentCoefficient 1.030 1.027 1.024 1.021 1.018 1.015 1.012 1.009 1.006 1.003
Chengxin 8.00 7.90 7.80 7.70 7.60 7.5 7.40 7.30 7.20 7.10
Adjustment
Coefficient 1.000 .9 77 0.994 0.991 0 0.998 0.985 0.982 0.979 0.976 0.973< /p>
Appendix 7: Adjustment coefficient of the floor area ratio at the place of demolition of an urban house
Floor area ratio
< p>Bungalow, two-story building, multi-story building Adjustment coefficient≤0.60 ≤0.75 ≤1.14 110
0.61-0, 69 0.76-0.84 1.15-1.19 105
0.70 0.85 1.20 100
0.71-0.75 0.86 - 0.90 1.21-1.25 95
0.76-0.80 0.91-0.95 1.26-1.30 90
0, 81-0.85 0.96-1.00 1.31-1.35 85
0.86-0.90 1.01-1.05 1.36-1.40 80< /p>
≥0.91 ≥1.06 ≥1.41 75
Appendix 8: Indicative rates for urban locations
Category Emfirst-class placement Second-class location Third-class location
Yuan/m2 450 400 350
p>Note: Class I areas: in Gongjiao Road, Market Street, Wenhua Road and Zaoxiang Street.
Class II Area: Within the North First Ring Road, East Ring Road, South First Ring Road and original State Route 105, excluding the area of class I.
Category III zone: The planned zone excludes the part of class I and II zones.
Appendix 9: Adjustment coefficient for both sides of the street (corner)
Two sides of the street (more than two sides of the street are calculated as two sides of the street, only on the ground floor), the location level is higher. The street facade (main street facade) is taken as a reference, and combined with the secondary street facade conditions, it is adjusted as follows:
The adjustment coefficient of the facade width ratio streetsprimary and secondary s
The width of the facade of the secondary street does not reach 50% (inclusive) of the width of the facade of the main street 1.05
The width of the secondary street facade exceeds 50% of the width of the main street facade and is less than (100%) 1.1
The width of the secondary street facade exceeds 100 % (inclusive) of the width of the main street facade 1.15
Appendix 10: Depth correction coefficient for business buildings on the ground floor
Depth (meters) ≥10 8-10 6- 8 4-6 <4
Adjustment coefficient 1.0 1.03 1.07 1.11 1.14
Note: If the depth of the ground floor of the business building exceeds 10 m, the adjustment coefficient will decrease by 0.04 for every additional 2 m For the ground floor facing the street For extended positions consecutive other than. the independent structure of business buildings, the second purchase will be calculated at 70% of the price ofbasis of first purchase; the third purchase will be calculated at 60% of the base price of the first purchase;
Appendix 11: Correction coefficient for level factors of commercial buildings above the second floor
Floor First floor Second floor Third floor Fourth floor Basement
< p>Adjustment coefficient % 100 90 80 70 60Appendix 12: Reference standard for adjustment coefficients for residential grades for demolition of industrial facilities
Category Grade Structure, decoration and condition of equipment Adjustment
Coefficient< /p> p>
Steel concrete structure
Structure
(Frame) Load-bearing level 1 multi-layer steel concrete structure, steel concrete foundation, solid wall enclosure, cast iron ground on site, columns The net is large (6m×6m), with cement floor, steel doors and windows , and water, electricity and complete sanitary facilities.
2.323
Level 2: steel concrete supporting frame (or half-bonesaturated), steel concrete foundation, solid wall enclosure, network of small columns, cement floor, steel doors and windows.1.774
Steel-concrete structure
Structure< /p>
(rack) Level 1 steel concrete column, column top height greater than 7.5 m, steel concrete roof truss or steel roof truss, span >15 m, the tonnage of the crane is more than 5 tons. 1.623
Level 2 steel concrete column, column top height greater than 4.5 m, steel concrete roof truss or steel roof truss, span > 15 m, no crane. 1.258
All steel
Structure level one: steel concrete foundation, steel columns, steel beams, crane, colored steel sheet walls and roof , column top height greater than 6 m. 1.774
Level 2 steel concrete foundation, steel columns, steel beams, no crane, colored steel sheet walls and roof, column top height greater than 4.5 mr. 1.0419
Brick-concrete
Structure level one brick column, height of the top of the column 5.5 m, concrete roof truss or steel roof truss, crane 3- 5T running on wall, range 9-12m. 1.258
Brick column level 2, column top height 4.5 m, concrete roof truss or steel roof truss, span 9-12 m. 1,000
Annex 13: Reference standard for the annual depreciation rate of industrial warehouse buildings
Structure
Shape Steel, mixed steel
Brick-concrete structure
Brick-wood structure
Simple structure
Structure
Annual depreciation rate 1, 6%-1.2% 2.4%-1.6% 3.2%-1.8% 10%-6.5%
Appendix 14: Remuneration standards for parts and accessories whose construction area exceeds the certified area
Category level
Classification Content Standard Eave height 2.6 meters (inclusive)
and upper Eaves height 2.4 meters (inclusive)
Eave height greater than 2.2 meters (inclusive)
More than 2.2 meters (inclusive) Eave height
2 .2 meters
Downstairs
With
Room 1, brick-concrete structure, with doors and windows, four walls finished,
mortar masonry, plastered interior walls, brand new. 400 330 290 260
Grade 2 Brick and timber structure, with doors and windows, four walls,
mortar masonry, plastered interior walls, all new. 350 300 260 200
Grade 3 Brick and timber structure, with doors and windows, three walls,
Interior walls are plastered, new. 260 220 200 170
Level 4 If the above standards are not enough, use other materials
to build a simple house 80 50 30 10
The height of the eaves is greater than 2.6 meters, houses with a length and width greater than 3.5 meters will be compensated with an increase of 10% of the compensation price in accordance with this table .
Category level content standard Accurate
Level 1 portal Brick-concrete structure: prefabricated roof, mortar masonry Brand new 320 yuan/square meter
Level 2 Brick-wood structure: tile roof, brand new brick roof 260 yuan/square meter
Class 3 Other structures: tile roof, brick roof, gray roof Brand new 200 yuan/square meter
Class 1 toilets Brick and wood structure Brand new 84 yuan/square meter
Other new 2nd grade structures 56 yuan/square meter
Courtyard wall 1st grade red (green) brick wall, brand new 2.5m or more (including 2.5m) 100 -200 yuan/meter
1.5m-2.5m 60 -100 yuan/meter
2nd grade half brick, adobe wall, brand new 2m or more (including 2m) 40-50 yuan/meter
1m - 2m 20 yuan/meter
Manure pit, pigsty, masonry, new 60 yuan/square meter
Swimming pool, first class, masonry, new 70 yuan/square meter
2 ndetc. Stone masonry, brand new, 55 yuan/square meter
Grave, 1st grade, single coffin seat, 500 yuan
2nd grade, double coffin seat, 1,000 yuan
p>
Motorized well, hand-pressed well, 200 yuan/set
Old brick well 300 yuan/set
Small sand well 700 yuan/set
p>
Within 100 meters 5,000 yuan/set
100-200 meters 7,000 yuan/set
More than 200 meters 9,000 yuan/set< /p>
Bridge width 6-10 meters 10,000 yuan/seat
Width 3-5 meters 5,000 yuan/seat
Width less than 3 meters 3,000 yuan /headquarters
Pole Village collective and individual power poles and supporting facilities 1,000 yuan/pole
Appendix 15: Factors and standards for increasing and decreasing the value of a house
Structure project unit price (yuan)
Terrazzo floor (slab), mosaic, ceramic tile floor Square meters 36
p>Pasolid wood floor square meters 80
Composite wood flooring square meters 50
Exterior wall painted stone wall square meters 30
Plastic spray square meters meters 15
Imitation porcelain paint square meters 4
Exterior wall mosaics and porcelain tiles Square meters 40
Polyboard, dado plywood Square meters 10-25
Marble wall square meter 60-120
Soft packaging square meter 20-50
Low density panel square meter 30
Cement Plastering exterior walls 15 square meters
PVC material 30 square meters
Wooden partitions 4 square meters0
Interior wall wallpaper 20 square meters
Wall covering 20-40 square meters
Ring beams, structural columns, extension 70 meters
Single-sided brick wall, adobe wall extension 30 meter
Extension of unplastered interior wall meter 15
Exterior wall without joints extension meter 2
Someonewalls, Borrow wall extension meter 100
Aluminum plastic panel square meter 80-150
Doors and windows Single cut door and window Square meter 30
Double cut door and window, no sand Fans square meters 10
Covered door and window extensions meters 25-35
Iron doors and windows square meters 60 -100
Aluminum alloy doors and windows windows square meters 150-200< /p>
Security door square meter 150
Chinese style roofing (old) doors, windows and door fans square meter 15
Prefabricated cast iron flat roof in place square meter 50
Concrete insulation panel and roof insulation layer 30 square meters
Suspended plasterboard ceiling 20 square meters
Suspended PVC ceiling 30 square meters
Wooden grid Plank square meter 20
Double floor layer, double-layer roof square meter 30
Single roof (made of wooden stripse sandalwood mixed with bamboo, asbestos tiles, fiberglass tiles and other simple materials) square meter 30< /p>
Kitchen and bathroom bathtub set 200
Toilet set 150< /p>
Washbasin set, vegetable sink 50
Outside the city
Heating Calculated based on the area of the room where the radiator is installed Yuan/square meter 20
Initial installation fee Yuan/household 2000
Floor heating Yuan/group 100
Appendix 10 Six: Standards for moving fees for installations auxiliaries
Name Content standards Moving costs
Solar energy vacuum tubes with complete inner pipelines (new) 200 yuan/piece
Homemade bath 50 yuan/piece
Single shower 20 yuan/piece
Cable TV 300 yuan/piece
Window air conditioner 100 yuan/piece
Vertical air conditioner 200 yuan/unit
One for two wall-mounted air conditioner 300 yuan/set
Electric showertrique with complete pipes 200 yuan/set
Homemade bath Normal use of a single shower 50 yuan/piece
Single shower normal use 20 yuan/piece
Horizontal boiler normal use 7,000 yuan/T
Vertical boiler normal use 3,000 yuan/T
Ceramic sewer pipe, sand pipe 20 yuan/meter< /p >
Cast iron pipe 30 yuan/meter
Brick construction 30-50 yuan/meter
Appendix 17: Tree compensation fee standards
< p>Tree type Diameter at breast height Unit Transplantation fee (yuan) Compensation fee (yuan)Jujube tree, persimmon tree, apple tree,
Toona, apricot trees, stone < /p>
Pomegranate trees, pear trees, etc. Less than 2 cm per plant 1.5
3-5 cm per plant 5
6-10 cm, stump 20
11-15 cm, stump 50
16-20 cm, strain 80
21--25 cm, strain 100
More than 26 cm, 200 plants
Tree
Below 2 cm, 1.5 plants
3-5 cm, 5 plants
6-10 cm strain 10
11-15 cm strain 15
16-20 cm strain 20
21-30 cm strain 30
31-40 cm, 50 plants
More than 41 cm, 80 plants
Shrubs, lower crown diameter greater than 1.5 m, 10 plants
Crown diameter greater than 1.5 m, 15 plants
Vines: 50 plants with lower crown diameter at 2 m
100 plants with crown diameter 2-6 m
200 plants with crown diameter greater than 6 m
Explanation 1. Trees above are all surviving 2. Trees must be returned to their original owners;
Appendix 18: Compensation standards for young crops
Category Variety Specifications Unit price (yuan) Remarks
Food crops Wheat, corn, cereals, beans , etc. . Mu 700
Cash crops Cotton, peanuts, etc. Mu 1000
Vegetables According to growing conditions Mu 1000-3000
Nursery According to congrowth editions Mu 2000 -3000
Fish pond, depending on growing conditions, mu 3000-4000
Lotus pond, depending on growing conditions, mu 2000-3000< /p>
What does product definition mean?
Product definition refers to determining what the product should do. It is typically described using a product requirements document (PRD), which may include the following information:
Product vision
Market Objectives
Competitive analysis
Detailed description of product features
Prioritization of product features
Prioritization of product features
Competitive analysis
Detailed description of product features
Prioritization of product features p>
Product use cases (UseCase)
System configurationme required
Performance requirements
Sales and support requirements, etc.
What does product definition mean
Product concept, the main body is the product. When branded products launch new products, they often design a concept for the new product to highlight the benefits of the product. For example, "flat screen" and "mirror" in color TVs, "dual band" and "surround wind" in air conditioners, etc., all directly indicate the outstanding advantages of the product, and these image "talks" are become the main selling points of the product.
In marketing, what is the definition of product?
From a literal point of view, it is believed that you are doing a direct sales model. But regardless of sales in any industry, the product is your first customer. If you understand this sentence deeply, that's it. Without productts to provide us with a middle level, where could we make a profit? So, do you almost understand what the definition is?
What is the concept of modern products?
The concept of modern enamel is not just a physical product with use value, it includes three levels of content: 1. Commodity product. It refers to the utility and benefits that a product can provide to customers. This is the key to meeting customer needs and what customers actually want to buy. 2 shaped products. It refers to the formal structure and appearance of the product, including quality, shape, appearance, color, brand, packaging, etc. of the product. 3 extension products. Also called additional products, they refer to additional benefits and services that customers can obtain when purchasing products, including credit, delivery, installation, trainingtion, maintenance and other sales services.
What is the definition of product quality?
Basic Definition of Product Quality
Product quality refers to the planning, design and manufacturing of products by companies in accordance with specific standards in the field of commodity economics. , testing, measurement, transportation, storage, sales, after-sales service, ecological recycling and other necessary information throughout the process.
Annex reference
According to the international standard formulated by the International Organization for Standardization - "Management of quality and quality assurance - Terminology” (ISO8402-1994), product quality refers to the product “reflecting the sum of the capabilities and characteristics of the entity to meet explicit and implicit needs Although this definition refers to”. the qualitytangible physical products, it still applies to intangible database products. Specifically, the quality of database products must meet the following standards:
1. Authenticity. 2. Accuracy. 3. Integrity. 4. Feasibility. 5. Legality.
Supplement
Product quality is made up of various elements, also called product qualities. Different products have different characteristics and characteristics, the sum of which constitutes the connotation of product quality. Product quality requirements reflect the features and characteristics of the product that satisfy customers and other capabilities required by the party. Customer and other quality requirements often change over time and are closely linked to continuing advances in science and technology.
These quality requirements can be transformed into cfeatures and characteristics with specific indicators, generally including aspects of performance, security, availability, reliability, maintainability, economics and environment.
What is the definition of a product's selling point?
In simple terms, it is special, which means it has advantages over similar products. The effect can be better, the use is more special, more convenient, and the profit margin is high. packaging, image, cost-performance, effect, etc. Another advantage is promotion.
What does the concept of product mean?
This is a trendy product that cannot be released to the market or mass-produced at this time. Like the previous solar car.
What does product model mean?
Product model refers to a tactile code that the manufacturer uses to mark the same type of products with specificationns different with numbers or letters to facilitate differentiation.
For example:
The name of domestic air conditioners follows national standards and product models can be roughly divided into 8 parts, with the following meanings:
< /p >
The first letter represents the product code (domestic air conditioners are represented by the letter K
The second letter represents the climate type (usually T1 type), type T1 The maximum ambient temperature is 43 °C and the type code T1 is; omitted
The third letter indicates the structural form code (air conditioners are divided into integral and); types divided according to their structural forms Mechanical air conditioners are divided into type. window and movable type The code names are: split type - window type F - movable type - Y
The 4th letter indicates the code of.function (air conditioners are mainly divided into simple cooling type, heat pump type and electric heating type according to their functions. The codes are R and D respectively. The frequency conversion type is P and BP coded. < /p>
The 5th letters represent the specification code (the nominal order quantity is represented by numbers ***. If the cooling capacity of the air conditioner is less than 10,000W ); , the unit is 100 W; when the cooling capacity is greater than or equal to 10,000 W, the unit is 1,000 W); 6th letter represents the overall structure classification code or the divided indoor unit structure classification code (the indoor unit structure is classified into ceiling type, wall type, floor type, terrace type , recessed type, etc., among which the codes are D, G, L, T, Q, etc.);
The seventhettre represents the structure code of the outdoor unit (the code of the outdoor unit is W
); The 8th letter represents the factory design serial number and special function code, etc., and can be expressed in Chinese Pinyin capital letters or *** ;p> The following takes Gree air conditioner as an example for a brief explanation:
KFR-50LW/E (5052LA), where K means room air conditioner and F means split type. R means heat pump type, 50 means the cooling capacity is 5000W, L means floor-standing type, W means outdoor unit, E means Cool King series products, LA means light box panel, 52 means factory design serial number.
What is the “overall product concept”?
"The overall concept of the product"
People generally understand products as objects with a specific physical form and use.fiques. Something to gain. This is a narrow definition. Marketing believes that products in a broad sense refer to the sum of items that people obtain through purchase that can satisfy certain needs and wants. It includes both product entities with material forms and non-material benefit forms. the product".
Modern marketing theory believes that the overall concept of product includes five levels: basic products, tangible products, additional products, expected products and potential products.