There are two types of sealing rings. One is used on the suction pipe. This sealing ring prevents dust and foreign objects from entering the water tank. Corrodes the silicone ring inside and accelerates the aging of the silicone ring. A water leak occurs. Moreover, he also plays a beautiful role.
The second type is the silicone ring inside the water tank, which is fixed on the glass tube and embedded in the water tank liner. This is a silicone ring, its main function is to ensure waterproofing. Prevents water leaks and insulates against heat.
In summary, the function of the sealing ring is to prevent water leakage and improve the insulation effect and appearance of the water heater.
The sealing ring of the solar water heater is leaking
The operation steps are as follows:
Push the solar tube up to separate the tube lower. part of the base, then pull it down. Simply remove it, being careful not to damage the small silicone solar glass column underneath, which is like that of the thermos bottle, otherwise it will no longer be insulated. Remove the silicone ring and replace it, press it in the opposite direction and you will be fine. When installing, apply a little soapy water to the glass column, which is more convenient.
Detailed information:
1. When installing the solar water heater, there may be a smell of dust or oil in the water pipe. When using it for the first time, you can open the tap to. remove the debris first.
2. The water stored in the solar water heater should be discharged regularly depending on local water quality conditions. Vidan timege can be selected in the morning when the sensor temperature is lower.
3. The surface of the solar water heater should be wiped regularly depending on the amount of dust in the area. It can be cleaned when it rains. Keeping the water heater surface clean can get higher heat. collection efficiency.
4. When hot water is not used for several consecutive sunny days, the hot water temperature will be very high. When using the solar water heater, please turn on the cold water first, then turn on the cold water. hot water to avoid burns.
5. There is usually a filter device at the outlet end of the faucet. Scale and debris in the water line accumulate on this screen. It should be removed and cleaned regularly to increase water flow. smooth the flow.
6. In winter, it is very common for pipes to freeze. If it turns out that the pipe is oldlized but is not yet cracked, it usually can be cleaned automatically after the temperature rises. You can also use a hair dryer to blow on the water line, or wrap a towel around the water line and then slowly pour warm water over it. Do not cook it on fire, hit the water pipe, or scald it with boiling water, because. this will cause the pipe to burst. Multiple freeze blockages can easily cause pipes to freeze and crack. Pipe insulation measures must therefore be reinforced.
7. Solar water heaters should be cleaned, inspected and disinfected on average every two to three years. Users can also carry out some disinfection work themselves. For example, they can buy disinfectants that contain chlorine. and add them to the water. Pour it in your mouth, let it soak for a certain time and then release it, which can achieve a certain disinfectant effect.
8. Solar water heaters need to be cleaned inside the vacuum tube every two to three years on average to prevent scale from forming inside the vacuum tube and affecting the heat absorption effect.
9. If the solar water heater is equipped with a special instrument, please pay attention to lightning and electricity protection. Do not take a shower and unplug the electric heater during lightning.
Baidu Encyclopedia: Solar Water Heater
Causes: 1. Usually the solar sealing ring is damaged. In this case, you just need to replace a few silicone solar rings. . It is very likely that the silicone ring imported from Solar Energy is cracked. You can remove the old silicone ring and replace it with a new one. 2. If the solar water heater leaks at the sealing ring, it isst usually because the sealing ring between the vacuum tube and the water tank is damaged and can be replaced. The water tank has not been cleaned for a long time, and the scale has corroded the inner tank, causing water leaks. However, it is very difficult to repair the inner tank. Suggested treatment methods: 1. Pay attention to purchasing the same type of silicone ring and do not buy a size that is too large or too small. If you install it this way it will always only leak when a silicone ring matches. The size is installed, can the leakage from solar inlet be stopped. In addition, the silicone ring should not be installed upside down during installation. If installed upside down, the problem will not be resolved. 2. The seal ring leakage may be caused by the aging of the seal ring. Simply replace a seal ring. First, drain the water, removez the electric heater and remove the silicone ring. 3. The only solution is to replace the inner tank. Depending on the water quality, solar cleaning every two to three years is necessary.