The key depends on the power of your water pump? The solar PV power generation system is 20-30% more powerful than your water pump motor (which leaves room for factors that may not allow full power due to weather effects), and Everything will be alright. Assuming your water pump is 10 kilowatts, then it should be equipped with a solar photovoltaic power generation system of around 13 kilowatts. As for the cost, since I don't know your installation conditions, terrain and specific characteristics, I will give you a rough reference value: the overall cost is about 100,000 yuan.
Why does it take more than an hour to fill a bucket when pumping water from a solar energy source
Build a water production unit solar energy in the vegetable field to power a small water pump. It can be configuredeven this:
1. Determine the capacity of the solar panel based on the power of the water pump used and the operating time. The larger the capacity of the solar panel, the more power the solar power system can receive.
2. Choose a suitable 24V or 12V battery according to the capacity of the solar panel and make sure the battery has sufficient power.
3. Install an inverter to convert direct current to alternating current so that solar-generated electricity can be supplied to the water pump.
4. Debugging and monitoring the performance of the solar power generation system to ensure the normal operation of the water pump and the maximum efficiency of solar collection.
As for how long it will take for the solar bucket to be full, it depends on the amount of water originally remaining in the bucket before pumping and the pumping efficiency of the pumpwater. The faster the water is pumped. or the original remaining water in the bucket. The more water, the shorter the time needed to fill it, otherwise the time needed to fill it will be longer.
Depending on your situation. : If the bucket capacity is fixed, the water flow efficiency of the water pump is low. The reasons for low water flow are: The water pump is used for a long time, causing wear or strain. at that time, it is not medium, etc., resulting in reduced efficiency, or the relevant pipes of the water pump are blocked, causing slow water flow, etc.
I hope you will adopt it, thank you