The solar water is discharged by the height of the water and the pressure is too low. If the hot water flow is low, it is a problem with the height of the solar water heater 1. Replace the pipe and enlarge the pipe diameter. 2. Add a miniature booster pump to the water outlet of the solar water heater. 3. There is now a supercharged shower that does not have electrical supercharging. As long as the cold water flows normally, it can flow hot water after use, there will be at least 3 times more. hot water than before use, and it can also prevent hot and cold, anti-scalding, anti-limescale, thermostatic valve is omitted. 4. It would be better to add a booster pump and use a small booster nozzle.
The water flow of the solar water heater is too low
The vertical drop between the solar water tank and the shower headbathroom shower is too small and there are too many turns; thin pipes also affect hot water pressure; horizontal. If the pipeline is too long, it will also consume part of the water pressure, it is recommended to connect a booster pump in parallel to the pipeline only for bathing, so that the problem will be solved; lack of water is probably because the pipe is clogged or the faucet filter is clogged; ordinary solar water heaters. This is a non-pressure product and the pressure of the hot water outlet mainly depends on the size of the drop. If the distance between the solar water outlet and the place of use is small, the hot water flow will seem low when used. The pressure is less, especially for those who live on the top floor in the morning, they will obviously feel it when using it again. Appropriately increase the height of the solar pour increase the height difference, or use upper and lower water pipes with thicker diameters; the pipes are long and have bends, which interfere with the flow of hot water, and rearrange the pipes if there are blockages; at the water inlet and outlet or upper and lower water pipes, you can ask professional after-sales service personnel to come to your house for maintenance.
The pressure of hot water from solar energy is very low. As a result, the water coming out of the shower head does not have much pressure and the water is very small (not all water pipes are blocked.) What is the reason? Solution
Cause analysis:
1. The vertical drop between the solar water tank and the bathroom shower head is too small;
2. the pipe has too many turns and this also affects the hot water pressure;
3. The youyau is blocked or the faucet filter is blocked.
Solution:
1. Use a small pressure booster nozzle;
2. Change the mixer tap or add a thermostatic valve;
3. Rearrange the pipes;
4. Increase the height of the solar power appropriately to increase the height difference, or use upper and lower water pipes with larger diameters.
Detailed information:
Daily maintenance of the solar water heater
1. When installing the solar water heater, there may be a smell of dust or oil in the water pipe. When used for the first time, you can open the faucet first to remove debris.
2. The water stored in the solar water heater should be cleaned regularly according to local water quality conditions. The hour of vidange can be selected in the morning when the sensor temperature is low.
3. For the surface of the solar water heater, wipe it regularly depending on the amount of dust. It can play a cleaning role when it rains. Keeping the water heater surface clean can get higher heat. collection efficiency.
4. Do not use hot water during continuous sunny days. The hot water temperature is very high. When using the solar water heater, please turn on the cold water first and then the hot water to avoid scalding.
5. The tap water outlet is usually equipped with a filter device. Scale and debris in water lines will accumulate in this filter. You need to remove and clean it regularly to increase the water flow.
6. In winter, it is very common for pipelines to be frozen. If it turns out that the pipeline has been frozen but is not crackedD, the sand will be automatically dug after the temperature increases. You can also blow it out with a hairdryer or wrap the water pipe with a towel, then rinse it slowly with warm water. Do not dry it by fire, hit the water pipe, or use boiling water to make it very hot. will burst the water pipe. Repeated freezing and blocking can easily cause pipes to freeze and crack. It is therefore necessary to strengthen pipe insulation measures.
7. Solar water heaters should be cleaned, inspected and disinfected on average every 2 to 3 years. Users can also carry out daily self-disinfection work if you can buy a chlorine-containing disinfectant and pour it. Into the water inlet, soak it for a while and let it out, which can have a certain disinfection and sterilization effect.
8.The vacuum tubes of solar water heaters should be cleaned every two to three years on average to prevent the scale formed inside the vacuum tubes from affecting the heat absorption effect.
9. If the solar water heater is equipped with special instruments, pay attention to lightning protection and electricity. Do not take a shower or unplug the glow plug during thunder.
The water pressure at home is low. The most important reason is that solar hot water production is very low. How to solve this problem ?
The pressure of hot water from solar energy is very low, so the water coming out of the shower head does not have much pressure because the cold water is of tap water and the pressure of tap water is high, so the water flow is large and the hot water is water itself. If the flow is very low, there may be a blockage somewhereart.
There are several solutions:
1. Replace it with an electric storage water heater, a gas water heater or a pressurized solar water heater, so that the water pressure is the same as tap water. Same thing in the pipeline.
2. Use a booster pump to increase water pressure.
3. Use a pressure shower.
Detailed information:
1. The insulated water tank of the solar water heater has great water storage function and can provide hot water to a large number of people. It can also be used as. an emergency water source when the water is turned off.
2. Solar water heaters use solar energy to heat water. They are environmentally friendly and harmless and can work normally when there is sunshine.
3. Solar water heaters are very energy efficient and can save a lot of electricity bills compared to using electric water heaters.
4. It is a high-tech product with large water production, good heat transfer and strong heat absorption capacity.
5. Fully automatic static work, no noise pollution, no manual operation required.
6. Once the water is heated, it is drained and purified before being delivered to the user. It is clean and safe.
7. There is no risk of gas leakage, electricity leakage, poisoning, fire, etc., and it is highly safe.
8. Qualified quality solar water heaters can be used for more than ten years.
The water pressure of a solar water heater is a detail easily overlooked by users. However, if the water pressure is too low, it will dieasy to adjust hot and cold water. , which directly affects the normal use of solar water heater. If faced with this situation, how should users resolve it? Below, the editor will teach you how to solve the problem of low water pressure in solar water heaters.
Water pressure of solar water heater
How to solve the problem of low water pressure of solar water heater: the water pressure is too low and an additional booster pump
If the tap water pressure in the area where the user lives is too low, you can install a booster pump on the water line of the water heater solar, which can solve the problem of solar water heater affected by water being too low.
How to solve the problem of low water pressure in solar water heaters 2: Use a pressurized water tank
Water tankswater storage ordinary solar water heaters achieve hot water pressure through height differences If you want to achieve high water pressure, you need to install the water tank higher, the better. The outlet water pressure of the pressure water tank is consistent with the inlet water pressure. If the tap water pressure is normal, the outlet water pressure of the solar water heater will be very stable.
How to solve the problem of low water pressure in solar water heaters: install a thermostatic mixing valve
The working principle of the thermostatic mixing valve is that at the mixing outlet of the thermostatic mixing valve Mixing valve, there is a heat sensitive element which uses the characteristics of the temperature sensing element to push the valve core into the valve body to move, blocking or opening the inlets of the valve cold and hot water. The usesUsers can adjust the mixing temperature of hot and cold water according to their needs. The required temperature can be quickly reached and stabilized, ensuring that the outlet water temperature is constant and is not affected by changes in water temperature, flow rate and water pressure. .