The specific method for removing the solar vacuum tube is as follows:
1. First of all, we need to wear plastic gloves to avoid burning our hands when removing the solar vacuum tube
2. Before disassembly, we can apply a little detergent on the contact area between the upper heat collecting tube and the bucket, which will be more convenient for us to disassemble.
3. Hold the vacuum tube with both hands, use force and twist it left and right, once to the left, then to the right. Try several times. Some of the rusty tubes require several turns. turn. Once the vacuum tube can rotate, we slowly push it up and push it out.
Detailed information
When disassembling solar vacuum tubes, you should pay attention to:
1. The best time for disassembly is as follows. cloudy or cloudy in the morning ou in the evening, because you have to drain all the hot water from the solar water heater before dismantling it (to avoid being burned by the hot water that seeps in when dismantling the pipe
2 ); . It is best to use a cleaner when disassembling. Use water soaked in alcohol or lye to lubricate the vacuum tube. At the same time, pay attention to the angle of the vacuum tube and avoid gently pulling the angle. prevent the vacuum tube from bursting and injuring people;
3. After disassembling the vacuum tube, pack it in special polyester foam compartments and place it in special cartons to avoid shock during transportation.
Reference materials:
Cannot be disassembled. The solar water heaters in the community of Qiaocheng District, Bozhou City, Anhui Province are developed by the development companynt community. According to the relevant documents of “Energy Saving Measures of Civil Buildings of Anhui Province”, the renewable energy equipment is configured uniformly for the community. community during development and construction. It is recommended not to disassemble it at will. If the solar panels are rusty or loose, it is recommended to report them directly to the development company for reinforcement, repair or replacement. If the development company refuses to deal with it, it is recommended to notify the municipal housing and construction department, which will invite the development company to timely carry out reinforcement, repair or replacement.