The operation of the Four Seasons Muge solar thermal insulation setting is as follows
After pressing the setting button for three seconds, the flashing symbol means which one is set. If you want to adjust which one, tap it a few more times until you want to adjust it. The adjusted items can be adjusted as soon as they flash. The first button from left to right is the adjustment button, which is used to adjust the water level, the temperature of the electric heater, as well as the scheduled water supply and heating.
2. The second button is the heat button, which is also the up button. It is used to manually heat, adjust the temperature and adjust the water level.
3. The third button is the isolate button, which is also the down button. It is used to adjust the temperature and water level for pipe insulation. The fourth button is usedto manually add water or stop the water. .
4. Finally, after all settings are completed, restart the power supply and the Siji Muge smart display will be configured.
How to set constant temperature on Linorit Solar
Solar water heater is a device that uses solar energy to heat water to provide water domestic water. In the structure of a water heater, the insulating layer is a very important element. It can prevent water temperature loss, improve water heater efficiency and save energy. Here are several ways to keep solar water heaters warm.
The first type: water heater liner insulation
This insulation method involves placing the insulation layer directly on the water heater liner. Traditional insulating layer materials include plastic foam, fiberglass, etc., but these materials are sensitive to moisture.midity and may cause a decrease in insulating effect or complete failure after long-term use. Therefore, it is currently recommended to use polyurethane as the insulating layer material. In addition to having the best thermal insulation effect, it is also more environmentally friendly and healthier than other materials.
Second: Reduce heat loss
The exhaust pipe and water pipe routing of the water heater are also the main reasons for heat loss. Therefore, heat losses can be reduced by reducing the length of water pipes or changing the route of the pipes. In addition, when water pipes are connected to the water heater, using insulation materials to wrap the water pipes can also effectively reduce heat loss.
Third option: Install an insulating cover for solar water heater
The coverSolar water heater insulator is a device that can be used as a protective layer around the solar water heater. Its main purpose is to protect the solar water heater from natural factors such as rain and strong winds. The material of the thermal insulation cover is mainly plastic or rubber, and the surface is covered with organic glass or reflective film to achieve excellent thermal insulation effect. At the same time, it can also reduce heat loss and improve the efficiency of solar water heaters.
In short, the above methods are all ways to effectively improve the insulation effect of solar water heaters and save energy. Users can choose the appropriate insulation method according to their actual situation. Only careful maintenance of the water heater can ensure its best operation.
How to adjust thermal insulationue for solar energy gbws106?
Press and hold the adjustment button for 4-5 seconds to find the constant temperature sign.
According to Baidu Encyclopedia, Linorite Solar needs to press and hold the setting button 4-It takes 5 seconds to enter the setting mode. After entering the setting mode, find the constant temperature sign and replace the solid dot in front of the sign with a hollow circle to set it successfully.
Linorit Solar is a product of Shandong Linorit New Energy Company, a Sino-foreign joint venture and one of the largest solar energy companies in Asia.
As long as you press the (heating) button, the heating icon on the screen will flash. At this time it is turned on and it will heat for 15 minutes every 15 minutes.
This function is used to ensure that the water supply pipe of the solar water heater does not freezes when the temperature is low in northern cities in winter. It is automatically heated thanks to the heating belt wrapped around the pipe. Just press the button ( Heating) will be activated as shown below:
Sunlight passes through the first glass layer of the heat absorbing tube and shines on the black heat absorbing layer of the second layer. of glass, absorbing heat from solar energy. There is vacuum insulation between the two layers of glass, so heat transfer will be greatly reduced (radiant heat transfer still exists, but there is no thermal conduction or thermal convection). the heat can only be transferred to the water inside the glass tube, causing the inside of the glass tube to heat up, and the heated water becomes lighter and enters the water storage bucket. water isolated along the heating surface of the glass tube. Water at relative temperatureive low in the bucket enters the glass tube along the backlight surface of the glass tube for replenishment. This continuous cycle keeps the interior of the water storage bucket insulated. The water is heated continuously to achieve the hot water target.