Aluminum alloy brackets are suitable for domestic rooftop power plants that require load-bearing power plants and industrial factory rooftop power plants that require corrosion resistance.
Hot-dip galvanized steel brackets are suitable for power plants with high strength requirements in areas subject to strong winds and large spans.
Solar photovoltaic brackets are special brackets designed to install and fix solar panels in photovoltaic power generation systems. The angle, orientation and arrangement of the bracket installation are directly related to the power output of the entire photovoltaic plant. , and its importance Equivalent to the foundation of a skyscraper. Choosing a good media will be of great help for future quality maintenance. When choosing photovoltaic supports, it is preferableIt's easy to find a reliable company that does good work. For example, Foshan Jugao New Energy is professional and efficient when encountering problems. installation and construction. Solve them together.
The installation method of solar photovoltaic racks can be divided into the following steps:
① Determine the installation location: First of all, you need to determine the installation location of the support. Photovoltaic solar racks, usually choose On a flat roof or on the ground. Make sure the installation location can receive full sunlight and is free of obstructions.
②.Prepare supporting materials: According to the design requirements and installation location, prepare the required supporting materials, including supporting frames, supporting columns, connectors, etc.
③. Install the support column: according to the requirements of condesign, fix the support column at the installation position, which can be fixed with bolts or concrete foundation. Make sure the support posts are plumb and stable.
Case study of Kesheng color steel tile roof photovoltaic bracket
④ Install the support frame: connect the support frame to the support column and use bolts or other connectors to secure it. Make sure the support frame is flat and stable.
⑤. Install photovoltaic panels: Install the photovoltaic panels on the support frame and fix them with clamps or screws according to the design requirements. Make sure the photovoltaic panels are installed flat and stable.
⑥. Connect the cable: Connect the cable from the PV panel to the inverter or battery, making sure the cable connection is firm and secure.
⑦. Testing and debugging: after completing the installationlation, carry out testing and debugging to ensure that the photovoltaic system operates normally.
It should be noted that the installation of photovoltaic solar racks requires professional technical design and installation. It is recommended to hire a professional installation team for operation. At the same time, pay attention to safety during installation and follow proper safety procedures.