There are three reasons why tubes are broken in vacuum tubes: 1) high temperature water causes the tube to burst; 2) Solar water consumption is small, making the water temperature above 90 degrees, high temperature tube burst; Tube bursting caused by excessive calculus. The location and time period of the broken pipe are different, so they are determined according to the situation.
The pipe needs to be replaced, but before replacement, the pipe must be replaced. Solar hot water should be removed and discharge the water into the solar magnetic water pipe, then remove the rubber ring connecting the vacuum pipe and the water tank. If it is too tight, you can soften it with hot water first and then hold it. the suction pipe and turn it left and right to remove it, and finally replace it with new pipes.
Causes of Broken Water Pipessolar water heaters:
1. There is no water in the water tank and the water tank temperature. the vacuum tube is very high during the day. If so, if water is added, the pipe will burst due to the large temperature difference.
2. There is not much water in the vacuum tube because the temperature is too high. After water is boiled, the steam condenses into water when it encounters cold air as it reaches the mouth of the tube. . This will release a lot of heat, i.e. the vacuum tube could explode due to overheating, but this is generally rare.
Villa Master offers you local house construction policies, house construction drawings and villa design drawings;
Villa appearance rendering services, thousands of popular designs to choose from: https://www.bieshu.com?bdfc