Relatively simple. There are three ports, one is cold water port, one is hot water port and the other is hot water port. It should be noted that the thermostatic valve has a minimum pressure limit for cold water and hot water. You can see it in the product manual, or you'd better ask the dealer. Otherwise, state this clearly in advance when purchasing, and you can return it if the effect is not obtained. First, mix hot water into the valve. Water valves and check valves are added to both interfaces between the solar and water heaters. 2. Install a water valve at the water heater outlet, and add a water valve and check valve in a convenient location in the main solar hot water pipe room (the check valve must be installed horizontally). .Look for a four-hole pond or add four holes. I recommend it to no onell when installing two hot and cold taps. Note: It is not recommended to use solar hot water in the sink.
How to install a solar thermostatic valve
Introduction How to install a solar thermostatic valve is relatively simple. There are three ports, one is cold water port, one is hot water port and the other is hot water port. It should be noted that the cold water valve and the thermostatic valve