The sensor inside the solar overflow hole may be broken, which will cause the problem of continuous leakage from the solar overflow hole. The solar water mixer, pipeline safety valve and other accessories may be blocked and corroded, causing leakage. The solar collector could be damaged. If the solenoid valve is damaged, the solar overflow outlet will continue to leak. Suggested solutions: 1. First check if the relief valve is closed. If the emergency valve is open, the water tank must be closed manually when full. If not closed manually, the relief valve must be adjusted. to a closed state. 2. Check whether the various valves of the solar power are blocked and corroded. If this happens, they must be replaced. 3. You need to find professional maintenance personnel to come to your house for inspection to see if the hole detectorsolar overflow is damaged or if the solenoid valve is damaged. You should also check the sensor if it is confirmed that these parts. Are damaged, they must then be repaired or replaced. After replacement, the problem of continuous leakage due to solar overflow can be solved.
The top of the water tank and the drain valve at the bottom.
1. When the solar water heater is full, it overflows from the overflow port at the top of the water tank and the excess hot water is discharged through the overflow pipe to maintain the water level. normal water in the tank. water reservoir.
2. When the solar water heater is full, it will overflow from the drain valve at the bottom. If the overflow port at the top of the water tank is blocked or damaged, excess hot water will flow out. through the drain valve to avoid overfilling the water tank and causing a significant increase in pressure.