To open the watch back cover, you need to use a pry tool to push it up into the gap of the watch cover to open the back cover. It should be noted that when installing the cover you. it is necessary to remove the red sealing ringThe side with the strong>microchamferis facing down, otherwise the rear cover cannot be installed.
When the Tissot watch is started for the first time, you can first loosen the knob in the middle of the Tissot watch. Once the Tissot watch is loosened, the crown of the Tissot watch is. turned upwards without being removed to reassemble it. It is recommended to wind a new Tissot watch or a watch that has been stored for a long time about 35 times. This can reserve power for the watch to avoid pauses or inaccurate timings caused by. insufficient activity. Because the newThe Tissot watch will get stuck if you adjust the following functions while it is not working, which will cause the Tissot watch to stop working. Such as hour hand, minute hand, Hitachi, etc.
1. Standard Time Mode: The standard time screen displays hours, minutes, seconds, and days of the week. 1.1 Press the START key to display the date. 1.2 Press the RESET button to display the daily alarm time. 1.3 Press MODE to enter operating seconds mode. 1.4 Press the LIGHT button and the light will turn on for 3 seconds. 1.5 Press RESET+START keys to turn on/off the daily alarm, and the corresponding icon will appear/disappear; press and hold both keys to make a beeping sound; 1.6 Press the RESET+MODE keys to turn the hourly chime on/off (the full day of the week is on, otherwise it is off). ★Press and maPress and hold RESET+START+MODE in any state to display full screen, release to return. 2. Run seconds mode: Press MODE key once from normal time mode to enter run seconds mode. 2.1 Press the START key to start/stop the running seconds. If you press the RESET button, the screen will display the total value of operating seconds; if you press the START button, the running seconds behind the screen will stop, but the screen will still stop. Press the RESET button again to display the value. when the current seconds stop. 3. Daily alarm setting: Press the MODE button twice from normal time mode to enter the daily alarm setting state, and the time will flash. 3.1 Press the RESET key to change the setting object: hours and minutes. 3.2 Press the keye START to adjust the corresponding value. Press and hold for quick adjustment. 3.3 After daily alarm setting is completed, press MODE key to save and exit setting and enter normal time mode. ★When the daily alarm is activated, when the alarm time is reached, a beep sound will sound for 1 minute during the alarm, if you press the START button, the alarm will sound again after 5 minutes. 4. Normal time setting: Press the MODE button three times from normal time mode to enter the normal time setting state, and the second digit flashes. 4.1 Press the RESET key to change the setting objects: seconds, minutes, hours, days, months and weekdays. 4.2 Press the START key to adjust the corresponding value. Press and hold the button to make quick adjustments (except for seconds when adjusting seconds, pressy press the START key to reset the seconds value to 0. If the seconds value is greater than); or equal to 30, the score will increase by 1 at the same time. 4.3 When setting the time, press START key to select 12/24 hour display format. 4.4 After the normal time setting is completed, press the MODE key to save and exit the setting state, and enter the normal time mode.
I recently wanted to buy this watch (Tissot T-Sport T014.421.11.057.00 sports series men's electric watch).
Tissot Tengzhi series solar model has the following functions
Compass, timer, barometer, altimeter, alarm, etc.
The advantage is the battery life Powerful, simple to use, does not require external signal support and does not need to be linked to other devices.
I won't talk about smart watches.
This watch is a combination of ae mechanical watch and a quartz watch. It's a bit like Citizen's photokinetic watch. Simply put, photokinetic energy is a solar cell that charges the watch to make it work. The battery can usually be used for 10-15 seconds. Human kinetic energy involves converting the energy of your arm movement into energy inside the watch, but you can imagine human kinetics. the energy movement as a generator, charge the battery inside the watch, then relying on the oscillation of the quartz makes the watch work like a quartz watch, and the battery can probably be used for more than 10 years, the advantage is the combination of the advantages of; a mechanical watch and a quartz watch: in principle, there is no need to change the battery, and the operating time is as precise as a quartz watch, there are no disadvantages yet