There's too much water on it. It overflowed. You can let water out through the hot water pipe. Check if the overflow protection is released. If it has not been lifted. The heads of the temperature and overflow sensors of the solar water heatermay be damaged. Must be replaced. If your house is in the north, it's cold right now. It is necessary to prevent spilled water from freezing.
1. Leakage caused by blockage and corrosion of water heater mixing valves, pipelines, safety valves and other accessories.
2. Water leakage caused by broken water heater mixing valves, pipelines, safety valves and other accessories.
3. The gaskets of the mixer, pipelines, safety valves and other accessories of the water heater become old and cracked, and the sealing effect cannot be achieved, resulting in water leakage.At.
4. The water heater's inner tank is ruptured, causing a water leak.
Solutions to solar overflow port leaks
Generally speaking, in addition to water heater body leaks, faults such as mixing valve water leaks , pipes and safety valves are also This problem can be solved by replacing the accessories. Since water leakage in the body is caused by the rupture of the inner tank, making it unable to be used normally, and the price of replacing the inner tank of the water heater is relatively high, it is Better to replace it with a new one. water heater at the moment.
In order to avoid this situation and protect the hot water tank from corrosion, regular maintenance can be carried out. It is best to clean the water heater and replace the magnesium rod every 1 to 2 years. Magnesium rods may inhibit formation of impurities and scale, which can effectively guarantee the use of water heaters and prolong their service life.
How to remove the protection of Tsinghua Unisplendour solar water heater
The overheat protection and installation positions used by different manufacturers are different, which may be roughly divided into two types. : One is the thermal circuit breaker, usually in There is a box on the side cover of the water tank or at the bottom of the water tank. You can see it when you open the access cover. One is a thermal fuse, which is placed directly in the electric heating tube (it is placed in a blind tube with one end blocked on the electric heating tube, it is difficult for customers to repair this type of fuse, it is therefore preferable). report it to the repair manufacturer.
You can click directly on the button above. There is alittle lock sign on it, which is the protection sign. We can open the small lock sign by pressing the button. this means that the protection has been lifted. It is used normally. During use, be sure to follow the instructions in the manual and do not press the buttons at will.