Can be replaced.
If you want to replace the solar water heater with other types of water heaters, you can directly stop using the solar water heater and connect the tap water inlet pipes and hot water outlet from the original solar water heater to the installed one. Other types of water heaters can be used normally.
You can also add manual valves to the tap water inlet pipe and hot water outlet pipe to realize switching between different water heaters.
Solar water heaterDisassembly method:
Materials to prepare: solar water heater, equipment 'interview
< p>1. When disassembling, you must follow the steps. The first thing that must be clear is to turn off the power supply. Before dismantling and draining the water, you must first remember to turn off the power supply. carried out before repairs, otherwise penduring the disassembly process, it may cause electric shock problems.2. The first thing you should pay attention to when disassembling is that you must first remove the water from the insulated water tank to avoid burns from high temperature hot water during disassembly, and even if the the water in the water tank has been drained, it must also be left for a period of time until the temperature has completely dissipated before disassembly and maintenance can be carried out.
3. During the disassembly process, if it is not cleaned for a long time, it may be difficult to disassemble and it may even be damaged. Therefore, necessary protective measures must be taken during dismantling. Rubber gloves should be worn to avoid damage during disassembly. Scratches caused by improper operation.
4. Generally speaking, the vacuum tube of aSolar water heater is the most difficult part to remove, so the vacuum tube needs to be disassembled mainly. In addition, due to water rust, etc., the vacuum tube. must be carefully turned. It should be noted that there are seals at the upper and lower ends of the vacuum tube to prevent damage and loss.
5. After removing the vacuum tube and placing it in a safe place, you can disassemble the insulated water tank. However, it should be noted that after unscrewing the screws, two people need to work together to do so. lift the water tank. This process is not difficult, you just need to be careful. When disassembling, the parts of the insulated water tank should be stored to avoid damage or loss.