The main causes of solar water leakage include water tank overflow, water heater leakage, and water pipe leakage. Common causes of water tank leaks. If the water tank overflows, it is because the solenoid valve is defective and cannot be closed. The cold water and hot water pipes are connected in series, making the cold water pressure too high. The hot water pipe enters the water tank, thus causing water overflow which caused the sensor to malfunction and cannot indicate that the water level is low, so the water injection will still be activated. If it is due to this reason, you need it. to replace the broken solenoid valve and check whether the valves such as two faucets, water heaters and gas water heaters are stopped and replace the broken sensor.
Other reasons
Fault 1: Water heater leaks
Reason: This reason is because the coatingment of the water tank has been corroded and aged over time, resulting in The vacuum tube has also been damaged, causing the sealing ring at the connection between the vacuum tube and the gun to age. water, leading to aging, breakage and rupture of the leach water pipe.
Method: Replace the aging water tank, replace the aging vacuum tube, replace the broken sealing ring, and reconnect the water inlet and outlet pipes.
Fault 2: Water pipe leak
Cause: If the water leak starts from the upper water pipe or sewer pipe, the reason is due to the erosion of the PPR water pipe or aluminum-plastic pipe over time, leading to aging.
Method: Replace the solar hot water pipe. A water leak is a valve failure. If this is the case, the solenoid valve must be replaced.
Note
It is not recommended to drink the water from the solar water heater. Although it is clean tap water before entering it, the metals in the water heater contain relatively harmful poisons. . , such as lead, cadmium, etc., long-term consumption is extremely harmful to human health.
If the solar water tank is leaking, you can try the following steps to repair it:
Close the water inlet valve: you need to First close the water inlet valve. to avoid continued leaks.
Find the leak: Check the surface of the water tank to find the leak. Typically the leak will be a weld on the tank surface, tank bottom, or other connections.
Fix leaks: If you find a leak, you can use materials such as adhesive or silicone to repair it. When repairing, you must ensure that the material is completely attached to the surfboardace the water tank to ensure the leaking problem is resolved.
Reinstall the water tank: Once the repair is complete, the water tank must be reinstalled. During installation, you must ensure that the water tank connection is sealed to prevent water leakage again.
It should be noted that solar water tank leaks can be caused by many reasons, such as blockage inside the water tank, leaking heater pipes solar water, etc. If the problem cannot be resolved, it is recommended to call professionals for maintenance and treatment.