Use wire strippers to connect.
1. Use a pair of wire strippers to peel off the insulating layer on the surface of the wire at the root of the plug to expose the metal wire, approximately 1-2cm in length.
2. Match the wires at the root of the plug with the wires on the solar light or solar panel, distinguish them based on wire color, marking or wiring layout, then twist the two wires around each . another to form a connecting wire.
3. Use electrical tape or electrical tape to wrap around the wire connection, wrap it tightly and try to avoid exposing the metal part.
How many amps does the outlet of the Siji Muge solar water heater have
Yes.
Solar electric heaters are used for supplementary heating in winter. As long as the electrical outlet is located higher on the wall, there is no need tounplug it in winter.
Today's solar water heaters have electric heating functions. When it rains or the weather continues to be cloudy, the electric heater is used to keep the water hot and cannot be unplugged. It is also very inconvenient to unplug and plug it back in for a while.
Siji MugeSolar water heaterThe socket is 10A.
The power of the Siji Muge solar water heater will not exceed 2000 watts, and the plugs located on it are all labeled as 10 amp plugs.
The solar water heater is a heating device that converts solar energy into thermal energy, heating water from low temperature to high temperature to meet the use of hot water by people in life and production.