When designing solar street lights, there are requirements for the height of the light pole:
6W (courtyard lighting): the height of the light pole is 3 meters;?
8W (courtyard lighting): lamp pole height 3.2 meters;
10W (yard lighting): lamp post height 3.5 meters
12W (yard lighting): lamp post; height 4 meters;
< p>15, 18, 21, 24W solar street lights: the height of the light pole is 5 meters, the width of the road is 6-8 meters30, 36, 42W solar street lights: the height of the light pole is 6 meters, the width of the road is 6 meters 8~10m (2 lanes);
Solar street light 42.56 W: light pole height 7-8 meters, road; width 10 ~ 15m (3 lanes);
56 ~ 77W solar street light: the height of the light pole is 8 meters and the width of the road is 16m (4 lanes).
Technical requirementshe lighting poles:
1. Comply with current national streetlight acceptance standards. ?
2. The interior and exterior surfaces of the light pole are hot-dip galvanized for anti-corrosion treatment and then sprayed with plastic. Color is subject to rendering. The surface is smooth and not. discoloration. There are no needle holes, no sagging, no peeling, etc. ; The thickness of galvanizing is not less than 85 microns, and the thickness of plastic spraying is not less than 100 microns. ?
3. The support rods and rungs are made of high quality low carbon steel without obvious signs such as dents, and are hot dip galvanized and powder coated like the main rods. ?
4. The flange plate is formed by plasma cutting, with smooth periphery, no burrs, beautiful appearance and precise hole position.
5. The electric doorIt is plasma cut with precise dimensions, smooth and flat surface, and the anti-theft device and grounding device are welded. ?
6. The quality of copper core terminal blocks meets national electrical industry standards. ?
7. The design wind speed of the street lamp is above 35 meters/second, and the earthquake resistance is above level 8, ensuring that the entire street lamp can work normally in extreme weather conditions.