The water pressure is too low, the sensor head is damaged, the water heater instrument is defective, the solenoid valve is replaced or blocked.
1. The water pressure is too low and the water does not fill automatically. Adjust the water pressure or install a booster pump.
2. The sensor head of the solar water heater is damaged. Replace it with a new one.
3. If the solar water heater meter fails, please ask maintenance personnel to solve it.
4. The solenoid valve is broken or seriously blocked. The first can be replaced if damaged, and the second must be cleaned of blocked impurities.
If the home solar water heater keeps beeping, it may be due to the following reasons:
1. The water inlet valve is not closed: If the water inlet valve is not closed. closed, cold water will continue to flow into the solar water heater, causingnoise. Check if the water inlet valve is closed.
2. Water collects at the bottom of the water heater: If water accumulates at the bottom of the water heater, it will also cause noise. In this case, the bottom water must be cleaned.
3. Pressure relief valve failure: If the pressure relief valve fails, the pressure inside the water heater will be too high, causing noise. A new pressure relief valve is required.
4. Water heater pipe leak: If there is a water leak in the water heater pipe, it will also cause noise. In this case, you should check whether the pipeline is leaking and repair it in time.
5. Water heater temperature is set too high: If the water heater temperature is set too high, it will also cause noise. In this case, the water heater temperature setting will need to be adjusted.
If none of the above methods can resolve the problem, it is recommended toe contact professional maintenance personnel for inspection and repair.