The operation is as follows:
1. The solar water heater sensor has two parts: water level and water temperature, each with two wires and a total of 4 wires.
2. They cannot be connected together randomly, otherwise the water temperature and meter water temperature display will be incorrect.
3. Generally speaking, the square connector from the sensor to the meter has 4 small holes, corresponding to the 4 pins on the meter. Bad connections include: Temperature display.
4. If there is no water level, the temperature will not be displayed. If there is water level, there will be no temperature and there will be no water level display. You can swap the 4 wires repeatedly until the temperature and water level are normal.
Detailed information:
Cleaning the gas water heater
1. For gas water heaters, if the housing and filter are relatively undirty, simply use a damp cloth to remove the dirt. However, if the stains are heavy, the user should use detergent to clean them thoroughly. After long-term use, a lot of scale and dirt will accumulate on the gas water heater filter. Then the user needs to unscrew the water tap, remove the filter and clean it.
2. Water tank. Under normal circumstances, the water tank is an easily clogged part. Next, the user should carefully check whether there is any accumulation of scale, dirt, etc. cleaning. If so, you can use thread to remove it. But if you don't know how to clean it, you can ask professional after-sales maintenance personnel to clean it.
3. The induction needle and the ignition needle. The induction needleand ignition needle are important factors that affect the temperature of gas water heaters. If you find that the ignition effect is poor in daily life, it may be due to this. of the appearance of the induction needle or ignition needle problem. The solution is: wipe gently when cleaning, do not use too much force to avoid bending the needle.
4. Gas lines are usually made of rubber. The obvious downside is that they are very easy to fill with dirt. Additionally, many users choose to install them when installing water heaters. the kitchen is out of the kitchen, the problem of oil stains will become very big. Users can use detergent to clean oil stains on gas lines.