1. Firstly, you need to have the corresponding accessories, then follow the instructions in the picture above to put the nuts and coupons, then insert them into the water pipe.
2. Use a wrench to tighten the nut, and the water pipes of the hot water pipe will be connected on both sides.
3. The inner wire is directly connected to the upper and lower inlets of the solar water heater, tee diameter connection, solenoid valve connection and the outer wire is directly connected to the cold water valve. as well as the external wire and tap water. The connection of the interface, as well as the connection of the three-way hot water pipe and the water mixer, which is used to discharge hot water.
The rising and falling solar water pipes are hot water pipes, so you cannot connect the cold water pipes, unless your solar is installed in a locationwhere it is convenient for you to get on and off. So you can add a valve near the water inlet of the solar water tank. Then connect the water pipes anywhere on the upper and lower water pipes (hot water is needed when the water is hot, cold water is needed when cold water is needed). water is needed, close the valve near the outlet and open the water supply valve.
Villa Master offers you local house construction policies, house construction drawings and villa design drawings;
Villa appearance rendering services, thousands of popular designs to choose from: https://www.bieshu.com?bdfc