Will the leakage of the upper and lower solar valves affect the solar heating?

No. Leakage from upper and lower solar valves will not affect solar heating. If the valve leaks when the sun is exposed at midday, do not worry, because at this time the temperature of the water tank rises and the pressure begins to increase. If the water pressure exceeds the rated pressure, the solar valve will open automatically. The water leak we see is actually the valve that automatically drains the water and releases the pressure.

What to do if the solar valve leaks

I have never heard of "Leather mixing valve", only "< strong>Mixing valve, water inlet valve, outlet valve", the mixing valve is also called "Eight-shaped valve", and depending on the problem, it s It will act as the "water inlet valve" or "water outlet valve" and the valve body is blocked. The object is blue, so it should be the water inlet valve. (The obstruction ofns the water outlet valve should be red)

There are many reasons why the water inlet valve is leaking: The rubber pad of the valve body is aging, there is more cement and sand on the water inlet. valve filter and water heater pipeline. Excessive scale destroys the sealing effect of the raw material belt, and damage to the valve body itself may cause the water inlet valve to leak.

Valve Body Rubber Pad Aging:Any valve body in any water heater has a risk of rubber pad aging. Therefore, the first thing to consider when the valve body is used. The leak is the aging of the rubber pad. Make sure the rubber pad ages. Replacing the rubber pad with a new one after aging can solve the water leakage problem.

Note: Before disassembling the valve body, the main water supply valve must be closed.

There is too much cement and sand blocking the filter screen of the water inlet valve: This problem can only be seen when the valve d The water supply is withdrawn. Clean the sediment off the. valve body and reinstall it. However, it must be cleaned regularly, otherwise it may reduce the water supply and cause water leakage in the valve body again. At the same time, other water-using equipment in the house should also be cleaned regularly.

There is a lot of scale in the water heater pipeline, which destroys the sealing effect of the raw material belt: This phenomenon is not rare. Just ask after-sales service. To clean it. Before cleaning, please explainr water supply. If the valve leaks, the service personnel can solve it together. Cost is just a matter of communication. Of course, you can do it yourself, you just need to remove the water supply valve and rewrap the raw material tape.

Scaling occurs in water heaters used for more than three years. However, the amount of scale varies depending on water quality and frequency of use. You can judge the amount of tartar. Quantity of water produced when using the water heater. Determine how often your water heater needs to be cleaned.

The valve body itself is damaged: Replace it directly with a new valve body.

The possibility of damaging the valve body itself is very low This is because the internal rubber ring and rubber pad of the valve body are damaged, whichdrags the valve body itself. fail.For normal use, as long as you have strong practical skills, you can also consider repairing the valve body itself. But it is not recommended to repair it yourself. A new water inlet valve costs only a dozen yuan. The rubber rings and rubber pads inside the valve body are not easy to purchase and it is too time-consuming. Of course, friends who have enough time can choose to try.

The water heater water valve is most likely to leak due to the above issues. There are also unlisted problems, such as frost cracking. Such problems all occur in rural areas. in the north, if the insulation effect of the bathing area is not good, there is also a risk of freezing and cracking in winter, and there are many cases. LThe above water leakage problems will not only occur in the water supply valve, mixer tap, water outlet valve and shower head; because sediment also contains large and small particles, and it is not surprising to appear anywhere. When it comes to scale, the position of the shower head is particularly the most intuitive. Too much scale will cause the shower head to have less water flow, thinner water flow, etc.

Valves are installed on the solar panels, which play a vital role in protecting the water tank from safe operation under normal pressure. So what to do if the safety valve leaks during use? Let's take a look at the relevant knowledge right away.

1. What to do if the solar valve leaks

If the valve leaks when the sun is shining at noon, do not don't worry, because the temperature of thewater tank increases at this time and the pressure starts to increase when the water pressure exceeds the rated pressure, the solar valve opens automatically. Valve automatically drains and releases pressure.

If the valve still leaks on rainy days, it is likely that it is clogged or aged. When you encounter this situation, first close the solar main valve, release the water from the mixing valve, then loosen the upper screw between the handles, remove the gland from the valve core, remove the valve core and clean the clogged dirt. install it again. If there is still water leaking, you need to purchase a new valve and install it.

If the water pressure in your home is too high, it will also lead to leaking valves, especially in small high-rise buildings. It is recommended to install a pipeline pressure reducer. to the arwater bank.

2. Precautions for using domestic solar water heaters:

1. Regular inspections