The steps to disassemble the indoor solar water heater are as follows:
1. Turn off the electrical power or close the natural gas valve.
2. Empty the water from the water tank. Attach a hose to the drain valve at the bottom of the water tank, then insert the other end of the hose into the sink or bucket, open the drain valve and drain the water from the tank.
3. Remove the hoses from the water tank. Remove the straight and corrugated pipes from the tank.
4. Remove the transition hose on the water tank. Unlock the adapter tube and bend the transition tube, then remove the protruding clamp nut.
5. Remove the bracket and flange. Loosen the bracket and flange nuts and remove them.
6. Remove the protective cover on top of the water heater. Use a wrench to loosen the screws of the protective cover, then remove the protective cover.
7. Remove the pipes from the water heater. DPull the nuts off the water heater connections and other connected pipes.
8. Remove the protective cover at the bottom of the water heater. Loosen the screws of the protective cover and remove the protective cover.
9. Remove the water heater. Loosen the water heater nuts and remove the water heater.
Here are the steps for dismantling an indoor solar water heater. It should be noted that during the disassembly process, you must handle it carefully to avoid damage to the water heater. If you are unsure of your disassembly abilities, it is best to ask a professional to carry out the disassembly operation.