If water does not come out, it must be because the water tank is empty and water is not flowing. It could also be a fault in the solar water supply solenoid valve which must pass there. to provide water. It doesn't matter if it doesn't work, you won't get wet.
Inspection method: Press the water button, then turn on the shower head and adjust it to the direction of hot water. If there is water coming out, this proves that the solenoid valve is working normally. There is no water, this means that the solenoid valve is defective. At this time, it must be repaired or replaced.
3 evenings. According to relevant information from Siji Muge Solar, we learned that Siji Muge solar heater requires 3 square wires and 2 wires of anti-freeze tape. The sensor is plugged into each other and does not require wires if not plugged into each other. other, 4 signal wires are required. You need3 wires for the power supply and 2 wires for the solenoid valve. Siji Muge Solar Technology Co., Ltd. is a high-tech enterprise in Beijing specializing in the production, application and development of solar energy utilization technology products. The company cooperates with the New Energy Research and Development Center of Peking University and established. a cluster in Changping Park, Zhongguancun Science Park, Beijing. A large-scale solar product production base integrating scientific research, production and sales, with an annual production capacity of 300,000 solar water heaters.