1 First of all, it is necessary to respect the lighting duration of the user's home before installation, which generally should not be less than 4 hours. Less than 4 hours will affect daily water consumption.
2 The bracket is generally made of hot-dip galvanized angle iron and equipped with 304 stainless steel screws. When installing the bracket, be sure to pay attention to the end of Release. the collector being 3 to 5 cm higher than the tail, which is too high. Height will affect appearance. Once support is installed, it should not affect users at the bottom to avoid problems in the future.
The solar water tank should look good when installed, because users will see it every day. There is also room for after-sales personnel to carry out repairs.
3 The most important thing to mention is the installation of the circulation pipeion of the fluid. The length of the first pipe should not exceed 3 meters and there should be no gaps in between. second pipes. In the case of dead turns and inverted slopes, in nature, heat rises and cold falls. If both of these situations occur, it is likely that the water is not hot now.
4 Finally, I would like to point out that you should pay attention to your own safety and the safety of people below during installation.