How to use solar water heater leak protector

1. The reset button is used to reset (turn on power) after the faulty switch is tripped when the test button T is pressed or there is a leak in the line

2. The T test button is used to check a sense switch to determine if the leakage switch is operating properly. When the device is powered on and you press the T test button, the leak switch will trip, indicating that the switch is working properly! If the switch does not trip, it means the leak switch is faulty and needs to be repaired or replaced! (Usually check the working status of the switch once a month!)

Detailed information:

< p >Leakage protection device: A grounding protection device used to prevent personal electric shock and acincidents caused by leakage when the leakage current of a circuit or electrical equipment is greater than the setting value of the device, or when there is a risk of electric shock. shock on people or animals, it can act quickly and cut off the power supply in the event of an accident, prevents the spread of accidents and ensures the safety of people and equipment.

After the leakage protection switch is put into operation, effective management should be carried out to ensure that the leakage protection maintains a good working condition and truly plays a protective role.

1. After the leakage protection switch is put into use, when the device is powered on, the test button should be pressed once or twice a month to check whether the leakage protection switch is working normally and reliably. Testing should be increased especially pduring stormy seasons.

2. Regularly analyze the operation of the leakage protection switch and promptly replace the defective leakage protection switch.

3. Leakage protection switch should be done by professionals. Abnormal phenomena should be handled by an electrician to avoid extending the scope of the accident.

4 After a victim of accidental electric shock occurs within the protection range of the protection against leaks. switch, the action of the leakage protection switch should be checked and the failure of its protection should be analyzed. Before investigating the reason for the action, the site should be protected and the leakage protection switch should not be dismantled