The steps to configure the smart watch screen to be always on are as follows:
1/6 In the first step we raise our wrist to turn on the screen or press the button at the top right. 2/6 Then we turn on the watch. At this time, the watch will automatically turn off the screen after a certain period of time. 3/6 We slide up on the time interface to access the watch settings and other functional interfaces. 4/6 Then, we click on the second option, which consists of turning on the screen, and we click on OK. 5/6 This way our watch will stay on for 5 minutes, just click on it. 6/6Of course, if you update to the latest watch system, you can set it to always-on screen display, which can always show the time.
To start the operation, there is a button T corresponding to the number 3. Press it lightly for a secondof, and the watch will sound an alarm. Once successful, a horizontal line will appear. The Tissot screen continues to flash after the operation. Then you can continue to touch the center of the watch with your finger until the screen shows 24h. Then continue to press the T button. After a few seconds, the hour and minute hands of the touchscreen watch will appear and rotate to the position of the corresponding drive letter. At the same time, the screen displays the words 5yncHro. When making fine adjustments, hold down the + button corresponding to the 2-digit key. If you keep the action unchanged, the hour and minute hands will move quickly and the time will be better and more accurate with each click. Then press the button corresponding to the 4 numbers, the principle is the same as above. Finally, check that the hour and minute hands have been adjusted to all 12 charactersres and you can perform the last step correctly. Press the T button and the watch will also emit a “beep” alarm to indicate successful calibration.
How to set the time of Seiko Japanese solar watch?
After pressing the setting button for three seconds, press the button with the flashing setting symbol. If you want to adjust the button, press it several times until the item you want to adjust flashes.
The first button adjustment key from left to right is used to adjust the fill water level, electric heating temperature, as well as scheduled water fill and timed heating
The button; the heating button is also an up key, used for manual heating, temperature and water level adjustment,
Button insulation key, also the down keye bottom, used for pipe insulation, temperature adjustment and water level adjustment,
Water fill key, used to manually add or stop water;< /p>
Smart key, used to switch modes, press and hold to start or stop electric heating lock.
1. The solar watch is based on an atomic clock and automatically corrects the time. Method: When you go out on a clear day, when a bright light shines on the dial, the watch can automatically receive GPS signals to correct the time and adjust it to the correct current time. If the watch is covered by clothes, etc., and light cannot illuminate the dial, the watch will remember the last successful forced time correction and correct the time at the same time.
2. You can successfully perform forced time correction in advance during the period you are used toly in a place with clear sky and easy to receive signals. This will greatly improve the success rate of automatic time correction. Forced time correction method: When the watch determines whether to start automatic time correction, the following conditions should always be considered. Therefore, this does not necessarily mean that the watch will automatically start correcting the time as long as it is placed in one location. exposed to light.
Detailed information:
1. Photovoltaic watches are also called solar watches. The surface is exposed to light, it can move and persist in places without light for some time. The light energy watch is definitely the focus of attention. Wearing the light energy watch will definitely attract people's interest. This can become a stopic that people talk about no matter when or where. Light energy meters use light energy to avoid the hassle of regular battery replacement, are more environmentally friendly and have an average lifespan of more than 10 years.
2. Light energy watches use inexhaustible light as energy, convert light energy into electrical energy, store it in a rechargeable battery, and then release it into the movement at a constant speed. The replaceable structure of the light energy meter not only saves people the trouble and inconvenience of changing batteries, but also reduces the pollution of discarded batteries. The light energy meter can continue to work for more than 180 days in a completely dark environment after being irradiated with light energy (any light source) and fully charged.
DocReference materials:
Light Energy Meter-Baidu Encyclopedia