Installation of solar power and water mixer:
Before installation, attention should be paid to cleaning the pipes and removing debris in the pipes to prevent the mixer from being clogged. Regularly cleaned filters become clogged with dust and other debris, affecting the flow of water in and out. Areas with poor water quality should be cleaned at least once a month.
Before installation, try to achieve a balance between hot and cold water pressure. The pressure difference should not exceed 1 kg (0.10 MPa). It is directly linked to the mixing effect and water production. If the pressure difference is too great, a pressure relief valve can be installed on the high pressure side. Or add a pressure relief valve on the low pressure side.
When the pressure difference ratio between hot water and cold water exceeds 8:1, a reducerpressure limit limiting flow must be installed on the high pressure side to ensure normal adjustment of the mixing valve. When selecting and installing a solar water mixer, care should be taken to ensure that the rated pressure and temperature range requirements of the mixed water are consistent with the product parameters.
During the installation process of the mixer, make sure to read the labels clearly. There is a red label for the hot water inlet and a blue label for the cold water inlet. Pay attention to distinguishing the cold water inlet. the water inlet and the hot water inlet. After adjusting the temperature of the solar water mixer, if the water temperature and water pressure change, the outlet water temperature change value is (+2). If hot and cold water pressure is inconsistent, a one-way check valve should be installed at the water inlet to preventher the interaction of hot and cold water.
Detailed information:
1. The use of constant temperature and water-saving automatic water mixers takes up much less space and area than volumetric water mixing (mostly water tanks are used) and infrastructure auxiliary, construction and other complete systems The cost is significantly saved as a result, and compared to other thermostatic systems with the same functions, it has a higher performance-price ratio.
2. The installation of the automatic constant temperature water mixer is simple and convenient. It is attached to the wall with a bracket and then connected to the cold and hot water supply pipes. is connected to the shower.
3. Constant temperature has high precision and completely solves the water problemhot and cold shower.
4. The automatic constant temperature water mixer also has an automatic water supply interruption protection function. It doesn't matter if the cold water supply line or the hot water supply line stops the water due to a breakdown, the automatic constant temperature. The water-saving water mixer will automatically stop working. Effectively prevents burns and cold shock accidents.
Baidu Encyclopedia--Water mixing valve
Baidu Encyclopedia--Water mixer
The water heaters are shared with solar energy The steps to connect a mixer tap are as follows:
1. First, connect the water heater to the power supply and at the same time open the water tap of the water heater. prevent the water heater from burning dry.
2. Then open the cold water faucet, drain all the water from the water heater, open it againthe hot water faucet, then turn on the water heater to see if the water has been blown out. far.