1. When unloading the seaboards, use four approximately 100mm wooden beams at the bottom of the board to raise it. The board should not be placed directly on the ground and the height of the board should not exceed two meters.
2. Marine boards should be stored in a dry, ventilated environment, away from direct sunlight.
3. When sticking various decorative materials on the surface of marine boards, please clean the dust, dirt, oil stains, etc. first. on the surface of the board, then polish it with woodworking No. 360. sandpaper and use professional decoration material. If the air humidity is above 80%, it is not recommended to apply decorative materials.
4. When processing marine boards, it is recommended to take a few boards for testing before mass processing. Any unnecessary loss caused by production ofmass without testing will not be covered by liability.
Marine panel is defined as produced in accordance with the international marine plywood standard BS1088. It is environmentally friendly and reaches level E0/E1. It will not open when boiled for 72 hours. , cars, ships and exterior wooden buildings. It is also called "plywood", "marine plywood", Guangzhou Beilin Marine Board is quite good. The only national marine board whose formaldehyde content reaches E0 level is Guangzhou Beilin Marine. Sign. It can be made into ordinary panel or fireproof panel (up to class B), customized according to customer requirements.