Floor heating is the main heating product for people. General floors are not conducive to heat dissipation of floor heating. Therefore, choosing which type of floor heating to buy has become a difficult choice for people. ? Below, the editor takes you to find out more!
1. Better stability
The more stable the better, the heated floor will not deform. If the floor heating is used for less than half a month, the unstable floor will be easily deformed if you are careful.
What type of floor should be used for underfloor heating?
2. Wear resistance must be durable
Since the heated floor must be thin. rather than thick, the composite surface layer is generally 0.3-0.6mm. For better results, the wear resistance value of the main surface layer paint is higher than the traditional index.
3.Thermal conductivity and heat dissipation should be strong.
Both wood and bamboo are good natural materials. When ground heat is transferred to the surface through the ground, it will inevitably occur. There may be heat loss. Ideal soil can reduce these losses. Therefore, in order to reduce thermal energy losses and reduce heating operation and maintenance expenses, underfloor heating should be “thin rather than thick”. You can choose multi-layer solid wood, bamboo and laminate flooring. The thickness of the board must not exceed 8 mm and cannot exceed 10 mm.
Which floor is best for underfloor heating?
4. High dimensional stability
The environment in which heated floors are used is quite complex. The floor must resist various. Conditions during seasons without heating. Soil humidity and temperature increasessuddenly occur during heating, the parquet will inevitably resist the double changes of “temperature” and “humidity”. Therefore, heated floors should be purchased with good stability, such as integrated composite floors such as laminate floors, multi-layer solid wood floors and bamboo wood floors.
5. Moisture-resistant and heat-resistant properties are better.
Integrated composite floors require adhesives that must meet the three main indicators of environmental protection, bonding strength and strength at high temperatures. aging in temperature and humidity. Especially for heated floors, they must undergo high moisture resistance, low temperature resistance and other experiments. If ordinary adhesives are used, environmental protection indicators, moisture resistanceity, resistance to aging, expansion rate, etc. will not meet the standards. Therefore, it is essential that consumers check the merchant's product reports and inspection reports when purchasing.
Heated floor
6. The environmental protection index must be good (formaldehyde content)
The heated floor requires the less formaldehyde content, the better, and the less, the better. environmentally friendly. For the same material, the thicker it is, the more formaldehyde it contains, and the thinner it is, the less formaldehyde it contains. As you can imagine, when the floor is heated, the formaldehyde contained in the base material certainly evaporates faster than when underfloor heating is not used. In winter, the windows of the house are essentially closed 24 hours a day, so this needs to be taken into account. an important issue: indoor air qualitylaughing, the density of formaldehyde in indoor air.
The above is what the editor shared with you about the best flooring for underfloor heating. I hope this is useful to you. If you want to know more about underfloor heating, stay tuned.
Winter is here and underfloor heating has become an essential element in our home. When using underfloor heating, there are many issues to consider. Due to the special feature of underfloor heating, the installation of underfloor heating is also necessary. very high requirements for the floor.Strictly, what type of floor should be used and what conditions should be met for underfloor heating are all factors that must be taken into account. Many people must not understand this. Then the editor will take you to look at what type of soil. is used for underfloor heatingand par the ground What conditions must be met.
1. Which floor to use for underfloor heating
1. Generally speaking, composite flooring is more suitable for underfloor heating. Since the standard thickness of geothermal flooring is 6.5-8.5mm, the thickness of composite flooring is mainly 6-9mm, among which laminate flooring is mainly 6 to 8mm and three-layer solid wood composite flooring is 8-9mm, which has better heat transfer performance and its There is a wear-resistant aluminum oxide layer on the surface. This wear-resistant layer is conducive to rapid heat diffusion across the surface. Composite flooring is pressed at high temperatures and has very little internal moisture, so the floor will not warp due to moisture loss. Each layer of the floor cMulti-layer solid wood composite is interwoven horizontally and vertically to hold together. There are dense anti-deformation grooves on the back, which decompose the stress generated on the heating surface, so the amount of deformation is very small. . This is one of the reasons why laminate flooring is suitable for geothermal flooring.
2. Solid wood flooring. In comparison, the thickness of solid wood flooring is generally around 2cm, and keels are required during installation. If used as geothermal ground, there is air between the ground and. soil, air and wood. The thermal conductivity coefficient is very low, so the heat is not easily conducted to the surface, which will result in wasted heat, uneven surface temperature and obvious temperature difference. Additionally, solid wood floors have a high moisture content and are sujets to cracking and warping when heated to high temperatures for a long time.
3. Bamboo flooring has fine texture, good toughness, lower shrinkage and expansion than solid wood flooring, and is more comfortable to use. However, the color and texture of bamboo flooring are too unique, so it is only accepted by a small number of families who use underfloor heating. Bamboo floors also lack heat and humidity resistance. In the south, silverfish grow on bamboo floors, which affects the lifespan of bamboo floors.
4. Laminate flooring is also a better heated floor, but it adds more glue during production. The chemicals in the glue are easier to release during heating, affecting your family's health.
2. What conditions did the floor heat upnt must fill
1. It has strong thermal conductivity and strong heat dissipation, and should be thin rather than thick. Tips: Both wood and bamboo are. good natural materials. Heat from the ground travels through the ground. There will inevitably be some heat loss as it is transmitted to the surface, and an ideal floor can minimize this loss. Therefore, in order to reduce thermal energy losses and reduce heating operation and maintenance expenses, underfloor heating should be “thin rather than thick”. You can choose multi-layer solid wood flooring, bamboo flooring and laminate flooring. The thickness of the board should not exceed 8mm and the maximum cannot exceed 10mm.
2. High dimensional stability, should be small rather than large. Tips: The geothermal land use environment is quite complex. The floor must withstand various humidity levels during the seasonsyears heating, and the ground temperature will increase. suddenly during heating Parquet It must withstand a double change of “temperature” and “humidity”. It is therefore necessary to choose a geothermal floor with good stability, such as laminate flooring, multi-layer solid wood flooring, bamboo and wood flooring are integrated composite floors.
3. It must have good resistance to humidity and heat and be suitable for environmental protection. Tips: Integrated composite flooring requires adhesives. Adhesives must meet the three main indicators of environmental protection, bonding strength. and resistance to high temperature and humidity aging. Especially for geothermal soils, they must undergo experiments on high moisture resistance and low temperature resistance. If ordinary adhesives are used, the material protection indicatorsenvironment, moisture resistance, aging resistance, expansion rate, etc. will not meet the standards. Therefore, it is essential that consumers check the merchant's product reports and inspection reports when purchasing.
The above is all the content we have presented to you on what type of flooring to use for underfloor heating. I think everyone also understands what type of flooring to use for underfloor heating.