Are you talking about 600,000 kilowatts and 1 million kilowatts? Or 600MW and 1000MW
600MW thermal power generation parameters: main steam pressure 25MPa
Temperature 570 degrees C
Thermal power generation parameters 1000MW:
p >27MPa
603 degrees C
What is the current general scale of thermal power plants?
Although there is not much difference in technical level between 300 MW and 600 MW units, their starting platforms They are different:
1 If you are going to operate the 300 MW unit of the power plant thermal, since it has just been created, you should be the founding father. Once the power plant is completed, most of the original infrastructure personnel will leave or take unimportant positions, and the old operating personnel will become very popular. In addition, the thermal power plant is very close to the city and living conditions are better. , and theystill have urban residence registration;
< p>2 If you want to go to a 600 MW power plant, you must be far from the city. Living conditions are not as good as those in thermal power plants. If you have an urban household registration, you will encounter difficulties with your household registration if you wish to enter a major city in the future. As for whether it is run by people from Shandong, it has nothing to do with who you just asked. Additionally, Huadian is headquartered in Beijing and is not a Shandong-owned company. The power group company owned by people in Shandong is Luneng. Group company;3 units of 600 MW The platform is relatively high. Due to the crazy construction of 600 MW units over the past few years, there is currently an operating staff shortage of 600MW. 600 MW units, if you want to go elsewhere, the technical platform is relatively high, and other places are ready to have it; usually 600 MW units. A supervisor's salary is tens of thousands per month, and an operator's salary is 5,000 MW. -6,000;
4 The students don't want to go to the power plant, and even if they do, they will do their best to leave. This year, a 600 MW power plant promoted second-line cadres. The conditions were 5 years of service, party membership and obtaining a university degree. As a result, there was only one person in the entire factory;
5 Conclusion: If you want to live in comfortable conditions and have children in the future, If you want to live a stable life, you can go to a thermal power plant. Due to the heat supply, the harvest is essentially guaranteed due ton droughts. and flooding. If you want to make a career, it is recommended to go to a 600 MW power plant. There is room for struggle, but failure will lead to failure!
The current size of thermal power plants is generally greater than 1,000 MW.
As thermal power plants are now required to install large capacity production units of more than 600 MW (except heating units), the power plant must have at least two units , which will exceed 1,000 MW.
The reason for installing large units is that the unit capacity of the power generation equipment has increased, the economic performance of the unit is good, the coal consumption and the power consumption rate of the power plant is low, energy saving and environmental protection, and the power system capacity and power transmission and transformation capabilitiesance are larger than before. With increasing amplitude, large units are more suitable for transmitting electrical energy at high voltage and over long distances.
The number of units installed must take into account factors such as transmission capacity and the safety of the power plant itself. It is usually larger than two units and can be installed in stages.