Minecraft Wind Turbine, How to Synthesize a Wind Turbine
A wind turbine is a power generation device in Minecraft that can continuously provide electricity to distant players. So, what exactly does a wind turbine do? What are its characteristics ? The editor will bring you a detailed explanation of the wind turbine in Minecraft. I hope this will be useful to you.
Synthetic materials: 1 thermal generator, 4 iron ingots
Synthetic table:
The Minecraft wind turbine generates electricity all day, output 0 ~4EU/s. How to get maximum power: Climb to the upper limit, which is the highest place, and place the generator one space below the upper limit. Keep the generator in 9X9X7 without other blocks.
Wind energy generates on average 250 EU per MC day, but this is closely linked to its environment. Not only do you need to place it high up, but you also need tot remove the windshield.
Wind force: called wind force
The minimum value of wind force is 0 and the maximum value is 30. It changes every 128 ticks (approximately 6.4 seconds), and each change is +1 or -1 (cannot be reduced to a negative number).
If the current wind strength is 0 to 20, there is a 10% chance of increasing.
If the Qianfeng is between 10 and 30, there is a 10% chance of reduction.
The wind intensity reduction rate from 0 to 9 is (current wind intensity)%
The wind intensity increase probability of 21 at 30 is (current wind intensity at 30)%
The maximum safety value is 5 settings: 191 height, 2 cable blocks, no rainy days.
If the wind turbine's power value is greater than 5, there is a 0% to 0.1292% chance of damaging 0 to 4 iron ingots (broken).
Electricity = S*(Y-64-C)/750, S is the force of the wind, Y isthe height and C is the number of blocking grids in the range 9*9*7.
When there is thunder, the power increases by 50% (power*1.5), and when it rains, the power increases by 20% (power*1.2)