Synthesize an iron furnace first
1
Get a furnace
Synthesizing an iron furnace is very simple. I have explained it in many tutorials. articles on associated equipment. I've explained how to synthesize it.
Please synthesize a furnace as shown below!
2
Obtain eight iron plates
Use a forge hammer + iron ingots to synthesize at least 8 iron plates in the workbench.
3
Synthesize an Iron Furnace
Use five iron plates and a furnace and place them as shown below to synthesize an iron furnace .
END
Synthesize a rechargeable battery
1
Obtain an insulated rubber wire
Use the hammer blacksmithing + Collect tinplate from a tin ingot.
Use tinplate + scissors cutting plates to embed tin wire.
Then use tin wire + rubber (the sticky rubber is burned in aoven) to synthesize insulated rubber wires
All are synthesized on the workbench!
Wire can be obtained in the Metal Forming Machine!
2
Obtain at least four tin shells
The method is: use a forge hammer + a tin ingot to get a plate Tinplate
Next, use the Tinplate + Forge Hammer to get the Tinplate Hull!
3
A synthetic rechargeable battery
Uses: 2 red stones, 4 tin cases and an insulated tin wire
Follow the pictures below to synthesize a rechargeable battery.
END
Synthesis of thermal energy generator and its use
After gathering the above materials
We follow the method in the figure below to synthesize a thermal energy production machine.
Use the thermal generator
Hold the thermal generator in your handn, then place the generator towards the place where the thermal generator should be placed (do not put it in the wrong position, some keys are prohibited on the server, and dismantling it after placing it may result in the scrapping of your machine)
After storing it, open the thermal generator like a workbench.
In the dialog window, put fuel in the following location: it can be coal, planks, wooden ladders, etc.
We can connect the thermal generator via wires and let other machines use the electricity generated by the thermal generator
Or you can directly place your machine next to the thermal generator , or you can use the thermal energy from the generator directly!
It is recommended to use wires for connection, as the thermal generator only has six sides in total! Without wires, if the machine is placed next to the thermal generator, it cannotcould only power up to 6 machines!