A dead car battery will affect the use of the car's power distribution facilities and may also cause the car to stop. At this point, a battery charger can be used to charge the battery. If the car is driving outdoors and suddenly loses power and cannot drive, you can use the live wire connection method for emergency response.
Car wiring involves connecting the battery levels of two cars with a charging cable for charging. The actual wiring example tutorial is as follows:
1. The car must be connected. Get one. rescue trailer, assemble the fronts of the two vehicles and prepare two charging cables.
2. Open the engine hood and connect the positive and negative electrodes of the two vehicle batteries with the charging cables.
3. The engine of the emergency vehicle is idlingat high speed and the electric vehicle operates in an exploratory manner. If the battery is discharged, the vehicle should start quickly, then the generator will charge the battery.
Video tutorial on how to connect a car to a hotline
How long does it take to stop the engine after the hotline is activated?
Under normal circumstances, after putting the car into operation, the engine should idle. It takes about thirty minutes to turn off the heating. At this time, the discharged battery can be charged independently using the car's generator. Pay attention to the battery condition in normal times. If the car is left unused for a long time, it is recommended to remove the negative stage of the battery to avoid loss of battery power.
One million subsidies for car purchases