1. The hot-dip galvanized floor heating steel wire mesh is automatically butt-welded by hot-dip galvanized wire. It has the advantages of firm welding points, flat mesh surface, mechanized production and large daily output. for the construction of underfloor heating.
2. The wire diameter can be thickened or thinned according to the mesh size, and the price is relatively moderate.
3. Can be mass produced as required. The color surface is black or galvanized or sprayed with white baking paint or green paint.
4. Used in professional projects for the construction of underfloor heating and building partitions or external insulation.
5. It can easily fix the pipes to prevent them from being misaligned during the ash spreading process;
6. It effectively improves the bearing capacity of the soill and pipes. are not easily crushed;
7. It can prevent floor cracks;
8. The floor heating mesh can effectively accelerate heat dissipation and increase heating efficiency.
The surface of the mesh is very smooth without additional treatment, the solder joints are firm, and all solder joints are smooth and without protrusions. The mesh after anti-rust treatment has good anti-rust and anti-corrosion effects. .
The overlap length of the anti-crack net for underfloor heating
will be. Floor heating mesh, also known as floor heating mesh. During transportation, it is necessary to prevent the floor heating mesh from being wet by rain, which will cause the styling glue to fall off the surface of the mesh and the surface of the mesh will be restored. It should be stored in a sheltered place and should not be exposed to rain. Functionof the underfloor heating mesh is to improve the overall resistance of the insulation panel and to facilitate the installation and fixing of the heating pipes.
What are the advantages of steel mesh in practical applications compared to traditional hand-wrapped steel bars?
To overlap anti mesh -cracking, the overlap on both sides should not be less than 200~300mm.
The functions of the anti-crack mesh for underfloor heating:
1. It may have a fixing effect on installed pipes. Lay the underfloor heating mesh on the surface of the insulation. Layer and tie it with nylon with a fixed pipe. It can make the construction speed faster, construction positioning accurate, and the overall effect of pipeline installation better.
2. It is useful to improve the local bearing capacity of the soil in places subject tolarge floor loads, such as processing workshops and garages, underfloor heating mesh used for underfloor heating can increase the overall strength of the floor. the soil structure and avoid soil rupture and collapse?.
3. The underfloor heating mesh is also very effective in dissipating heat. Since steel bars have relatively strong thermal conductivity, the ground dissipates heat very evenly and quickly.
4. To prevent floor cracks, a floor heating mesh should be laid between the pipes and the concrete. The reason for the floor cracking was that the floor heating mesh was not used and the concrete on the floor was too thin.
What should you pay attention to before installing and laying an underfloor heating network?
1. When the steel bars are thick and the welded mesh cannot be bent, 1-2 barsLess steel can be welded to the ends of the welded mesh, then the two ends are inserted into the beam and tied with straight bars. Use on-site bonding methods to compensate for reduced transverse steel bars, additional steel bars and welded mesh connections at each node should be used.
2. Before laying the underfloor heating mesh, you must first planWhen determining the equipment plan of the underfloor heating mesh, when laying the underfloor heating mesh, it is necessary to provide guidance installation based on on-site practice and on-site efficiency of equipment personnel.
3. For the welded mesh that needs to be anchored at both ends in the beam, when the longitudinal steel bars of the floor heating mesh are thin, use the bending deformation function of the floor heating mesh to bend firstier. the middle part of the welded mesh upwards. Make sure both ends can be inserted into the beam one after the other, then lay the floor heating mesh flat.
4. Between the ends of the welded mesh, the overlap length of the steel bar cover joint shall not be less than 1.3 times the anchor length la and shall not be less than 200 mm in the area of overlap. , each welded mesh for floor heating There shall be no less than one transverse steel bar on each sheet of floor heating mesh, and the distance between one transverse steel bar outside the two underfloor heating mesh sheets should not be less than 50 mm.
5. When one of the two floor heating mesh sheets in the overlap area does not have transverse steel bars, the overlap length of the floor heating mesh sheet does notThe ribbed length must be 1.3 times the anchor length and must not be less than 300 ㎜. When the diameter d of the longitudinally stressed steel bars in the overlap area is ≥ 10 mm, the overlap length should be increased by 5 days.
How profitable are construction mesh manufacturers?
Reinforced mesh is mainly used for bridge reinforcement, crack prevention in construction projects (can replace load-bearing walls), support for coal mines, etc.
The reinforced mesh is welded with high quality low carbon steel wire and stainless steel wire. This is a new type of building wall material that can replace brick walls to create various load-bearing, non-resilient walls. load-bearing walls, balconies, etc.
Reinforced mesh is divided into welded mesh, galvanized mesh, welded mesh, steel mesh, wire meshunderfloor heating, steel wire mesh, barbed wire mesh, exterior wall insulation mesh and bridge construction mesh. Features: Beyond the traditional way of building a house, new metal materials are used to reinforce the wall – steel wire mesh – welded mesh, making the building stronger and better. It can replace brick walls for various load-bearing walls. non-load-bearing walls, floors, balconies, etc.
The details are as follows
The structural steel wire mesh is welded with high quality low carbon iron wire, steel wire and stainless steel wire. is a new type of building wall material, it can replace brick walls to achieve various load-bearing walls, non-load-bearing walls, balconies, etc.
The structural steel mesh commonly used on construction sitestion is also called structural steel mesh, floor heating steel mesh, steel wire mesh, steel mesh, geothermal mesh, floor heating mesh, bridge construction mesh and ground crack prevention. Steel mesh, roof crack resistant steel mesh, etc.
Structural steel mesh series is divided into: electrically welded structural steel mesh, floor heating structural steel mesh, reinforced structural steel mesh, etc. Tongjie structural steel wire mesh is shipped to Shandong (Jinan, Jining, Dongying, Weifang, Qingdao), Henan (Zhengzhou, Zhoukou, Kaifeng, Shangqiu), Jiangsu, Zhejiang, Anhui, China every year. Hubei, Guangzhou, Beijing, Jilin, Inner Mongolia. , etc. ground.