There are many possible reasons why a gas stove may not light at low flames. Here are some common reasons and solutions:
1. Igniter Failure: The igniter may be damaged due to long life. -term use. Ignition failure due to damage or discharged battery. At this point you can try replacing the battery or repairing the ignition.
2. Gas switch failure: The gas switch may fail due to long-term use or be blocked by dirt and cannot start the gas stove. At this point, you can clean the gas switch or replace damaged components.
3. The gas pipeline is blocked: If the gas pipeline is blocked or the gas valve is closed, the gas stove will not be able to ignite. At this point, it is necessary to check whether the gas pipeline is working properly and troubleshoot.
4. The burner is blocked: If the burner is blocked, it will not be able to light normally. At this point you can use a toothpick or brush to clean the burner to ensure the flame is not obstructed.
5. Insufficient gas supply: If the gas supply is insufficient, the small fire cannot be lit. At this point, you can check the gas pipeline pressure to ensure there is sufficient gas supply.
In short, there are many reasons why the gas stove cannot light at low flame, and they should be investigated according to the specific situation. If none of the above methods solve the problem, it is recommended to have professional technicians perform maintenance.
If the gas cannot light the fire: ?
1. The ignition needle may be too dirty or broken. Clean the oil on the ignition needle ; ?
2. The battery may be discharged. Replace the battery and try. If there is no discharging sound, the battery may not be in good contact or there may be a problem with the battery. Go to an electrical repair shop for repair or go to the gas stove sales department to purchase it.
3. If it does not work, you should ask the after-sales service of the stove to check it to avoid causing safety hazards. This could be caused by damaged wiring, circuit problems, or dead batteries. There is a discharge sound (pop) but no sparks. The insulating rubber of the high voltage line may be broken or cracked. Just replace it with a new one.
Detailed informationWhen lighting, observe whether the gas meter turns. If it spins, don't worry, you can light it with a lighter while pressing the button. If the brickt lights up, this means that there is a problem with the ignition mechanism of the stove, and you can ask the after-sales service to repair the stove; has been emptied and needs to be deflated.
Observe if the discharge arc is blue-white. The distance between the two ends of the discharge is preferably 4 to 6 mm. Excessive advancement will cause the spark to turn red or yellow, and the arc energy will be. insufficient. It is necessary to adjust the position of the fire cap or ignition needle and ensure that the distance between the discharge terminals is appropriate.