The method is as follows:
After removing the tire from the rim, attach the rubber sheet raw special At the wound, use a baking machine to bake the wound for about 10 minutesrightuntil the Raw rubber sheet and tire are completely attached. Tires repaired by this method are more durable and there is virtually no need to worry about further leakage from the wound.
The above is my answer.
There are four methods of tire maintenance:1. Perform a four-wheel alignment and tire rotation: Perform a four-wheel alignment and tire rotation every 10,000 miles.
2. Check Tire Pressure Frequently: Tire maintenance also includes checking air pressure regularly. Tires whose pressureof air exceeds the specified limit will significantly reduce the life of the tire, while tires with air. pressure lower than the specified limit will cause poor braking effect, and difficult or heavy steering will also shorten tire life.
3. Always pay attention to the marking lines on tires: Tire wear marks are located in the main drainage channels of the tires and are rubber bosses with a trapezoidal section. When the tire tread is worn down to the wear mark, the tire should be replaced. During the rainy season, in order to prevent vehicles from slipping on wet roads, the tire tread depth should be maintained at more than 3mm.
4. Check Tire Condition Frequently: Check tires frequently to quickly detect bulges, cracks, cuts, nails, ca agingvalve leakage and abnormal tire wear. Pay special attention to checking tire tread and edge wear. ?
I hope this can help you.