Hello, the common reasons why the gas stove still beeps after turning off the flame: 1. Caused by oil pollution: please check if the gas stove is dirty, please clean the oil on the eye of the stove and try to turn it on. off again; 2. If you close the gas source valve directly and the flameout alarm occurs, you just need to restart it to close the valve and then turn it off. 3. If the fire is out normally or there is a beep, it may be a valve or pulse failure. Please contact maintenance personnel to come and check. ~
The switch compression spring has no elasticity, or has poor elasticity and cannot return to its original position. The high voltage electronic ignition is damaged. The switch contacts are damaged, the solenoid valve is not open and the air source is not flowing to the tror fire. Replace the gas stove switch with a new one and make sure the switch is working properly. Replace it with a new igniter. Adjust the position of the thermocouple so that the temperature of the fire can affect its normal use. Check if the solenoid valve connection wire is properly connected and reconnect it. If the flameout protection device is broken, it can only be replaced with a new one. Extended content: Precautions for using gas stoves 1. The room where the stove is used should be well ventilated, otherwise safety accidents may occur and cause casualties. 2. When an air leak is detected in the stove, the air source should be immediately cut off, the doors and windows should be opened, and the indoor air should circulate through spontaneous combustion. Electric fans, kitchen hoods, etc. are not authorized. be used to eliminateer the gas. Electrical switches are not permitted and fireworks must be kept away from Enyi Promotion. 3. Do not stack flammable objects near the stove or use it to cook towels, clothes, etc.