Blue black white gray. The blue wire from the generator is connected to FR or M, the black wire from the monitoring wire to the engine computer is connected to IG, the ignition switch is on and the white wire with electricity is connected to B , the normal gray wire is connected to L and the load indicator wire is E. The two-color one should be grounded or neutral, and the other three are phase wires. You can connect four wires at will, which are the. ABC three-phase wires and protection wire.
The appearance of the Toyota Reiz
It is not only very sporty but also very fashionable. The front adopts a young and sporty design style, and the. air intake The grille adopts a black honeycomb design, full of sporting momentum. The exquisite headlight cluster has a very cool shape and the interior is very carefully carved. LED daytime running lights have an excellent effect when turned on. adopt a designin black honeycomb. The sporty front contour design brings a wide range of performance.
The side shape is still young and majestic, the straight waist is very three-dimensional, the sloping roof line is very sporty, the window line design is stretched, the rearview mirror design is exquisite and the shape of the wheel hub is very dynamic. Compared to the dazzling one before, it is slightly mediocre. The rear lights have a very refined and trendy shape, and the black rear frame has a dynamic design.
The Reiz 2.5 2013 alternator does not produce electricity and the battery indicator on the instrument does not come on?
< strong >Old modelToyota RuizhiThe engine of this car needs to remove the generator screws and then remove the air conditioning pump. There is a screw behind it.
Open the back cover, first use a marker to draw three positioning lines between the shaftand the motor housing, the encoder movable base and shaft, the movable positioning ring of the encoder movable base and the motor. housing. Loosen the two fixing screws between the encoder base and the motor, and unscrew the connecting screw between the encoder and the shaft. For the tapered connection shaft, the connection is tight.
At this point, you can use a hammer to hit the thick screwdriver inserted into the side of the encoder and motor (the deeper the screwdriver is inserted, the greater the thickness) to pop out the entire encoder. Pay attention to the position where the screwdriver is inserted and do not remove the encoder if the encoder is broken, do not use too much force when hitting. Be careful not to let the encoder fall to the ground, otherwise it will break.
For those fixed with stud screws, you need to unscrew the stud screws first, then remove them directly by hand.
DesignAppearance
REIZ's appearance design is fascinating. Thanks to optimal body proportions full of dynamic charm, it achieves intelligent and elegant aesthetics as well as the unique elegance and luxury of a premium sedan. The body surface is bright, gorgeous and full, breaking the traditional concept of cars of the same class. Create a new and exciting look for the future.
If the dashboard light does not come on, first check the dashboard power fuse. If it is burned out, it must be replaced. Disassemble the dashboard. The lighting is usually located on the dashboard. On the back of the panel, replace any lights that are not lit. Generally, if individual lights are not lit, it means there is no problem with the fuse and wires. The main reasons are:
1. The lights of tdashboard are damaged and need to be replaced in time;
2. If the dashboard power line is broken, open or shorted, this will also cause a problem. the car dashboard does not light up;
3. The car dashboard power fuse if unplugged, naturally there will be no power supply and the dashboard will not light up.
Precautions when using the car dashboard:
1. When the light comes on, you should immediately observe the odometer. If the cumulative mileage reaches or exceeds 100,000 km, it must be. replaced with a new one, otherwise the timing belt may break and the engine will not run properly.
2. After replacing the new timing belt, remove the rubber plug outside the reset switch on the odometer panelue and press the reset switch inside with a small round rod so that the timing belt indicates that the light turns off. If the indicator light does not turn off after operating the reset switch, the reset switch may be defective or the line may be grounded, and the fault should be inspected and cleared.
3. After replacing the new timing belt, remove the odometer and set all odometer readings to 0.