Currently, most partition materials are made of UV panels or fireproof panels. In public places UV panels are used, which are not only protective but also waterproof. If it is a personal interior decoration, it is recommended. use ice and fire panels. The current profitability of ice and fire panels is very high.
Ice and fire panels are also called fiber cement panels. It is a new type of building material made of silica and calcium as the main raw materials and added various maintenance methods. Ice and fire panels http://www.hxbhb.com/list-1-1.html appear on the market with a completely new look. The interior and exterior decoration features a different style and distinctive colors.
Flame-retardant performance: thanks to the use of special base materials, it is verifiednon-combustible tabletop, absolutely fireproof and achieves the highest level of fireproofing.
Waterproof performance: Through the special ice and fire panel process, it is completely waterproof and 100% waterproof.
What types of panels are there?
1: Fireproof panel is also called fire resistant panel, which can be explained literally. The fireproof board has good fire resistance. but it is difficult to burn and prevents fires to a certain extent, but that does not mean it can prevent fires. You still need to pay attention to fire safety.
2: The material of the fireproof board is fire-resistant and is divided into the following five categories:
(1) Mineral wool and glass wool are used as insulation materials. the materials themselves are non-combustible. , good resistance to high temperatures;
(2) Cement boards are used as materialu insulating, with high strength and good fire resistance;
(3) The main components of fireproof plasterboard are non-combustible and contain water crystals, good fire resistance;< /p>
(4) Building boards made of lime, silicate and inorganic fiber reinforced materials, as the main raw materials have high strength, good thermal insulation and durability
(5) Fireproof panel mainly made of magnesia cementitious material, supplemented by fiberglass fabric and filled with a lightweight, non-combustible insulating material
There are 8 panels. The types are density board, block board, finger joint board, particle board, particle board, fireproof board, plywood and eco board.
1. Density board
is a panel made frompowdered wood then glued and pressed with glue. good stability and good surface decoration effect, but its nail holding power is poor and its waterproof and moisture-proof effects are also poor, so it is widely used in the manufacture of furniture, floors, etc.
2. Blockboard
It is also called large core board. Its inner core is a hollow board or solid wood board, and its two sides. the boards are covered with a layer of plywood. Its strength is generally better, its nail retention power is better and it also has good moisture resistance and sound insulation. However, its bending strength is poor and it is prone to bending, deformation, etc., so it is widely used in. furniture industry, achitechive.
3. Joint board
It uses several pieceswood. The board is made of spliced boards. Its wooden board interface is generally jagged in shape, and the amount of glue used is generally relatively small, so it is generally more environmentally friendly. it is therefore more decorative. Good, but it is also prone to problems such as cracking and deformation, so it is widely used to make cabinets, furniture, etc.
4. Particleboard
This is plywood made from broken wood. The surface layer is usually covered with melamine. Its material is generally relatively uniform. , has relatively high strength, is not prone to deformation problems, and has relatively good stability. However, its flatness is worse than that of density boards, and it is not easy to make complex shapes, so it is widely used in the furniture industry. indinterior decoration industry, etc.
5. Particleboard
It is made of synthetic resin and wood chips. It not only has good nail retention power, but also has sound insulation and. thermal insulation. It has good water resistance and high performance, but its hygroscopicity is also relatively high, so it is widely used in the manufacture of paneling, furniture, etc.
6. Fireproof panel
It is one of the refractory building materials. Its main raw materials are fibrous materials, siliceous or calcium materials, etc. The colors are generally brighter, and they are also better in terms of moisture resistance and waterproofing, have better wear resistance and are more affordable. However, they cannot create a three-dimensional effect, so they are widely used in industry.ie furniture and. interior decoration industry.
7. Plywood
This is a board made from cutting wood into pieces and then using glue to glue multiple layers of wood pieces together. Its resistance is. generally it is relatively high, can resist bending and is not expensive, so it is widely used in aviation industry, furniture industry, construction industry, packaging industry , etc.
8. Eco-friendly board
Also called melamine board, the inner core is particle board or density board, etc., while the surface layer is made of different colors and textures. It is made of paper, melamine board resin, etc. It has good high temperature resistance and wear resistance, and has a good decorative effect, and the surface is not easy to peel or change color, so it is widely used.read. in interior decoration industry and furniture industry, flooring industry, etc.