1. Check for antifreeze in the generator water tank, diesel in the oil drum, and generator oil.
2. Check if the generator battery switch is closed, if the speed switch is in the low speed position, if the power switch behind the generator is closed, and if the generator power switch is electricity the transformer in the room is closed.
3. During a power outage, convert the internal and external lines of the main transformer to generate electricity:
1. Turn on the generator battery switch.
2. Turn the generator start knob to start the generator. After waiting for the generator to start normally, Kejian Construction Machinery recommends adjusting the low speed gear to the high speed gear and paying attention to the generator starting normally. the voltage of the generator is 380 volts.
3. When the voltage stabilizes at 380 volts, turn on the generator, then turn on the power switch.
Fourth, after completing the above three steps, turn the power switch of the transformer in the power generation room to supplement the power supply to the west hospital area.