The generator did not respond when I started it with the key, but I started it manually using the co

In this case, there is a high probability that the ignition switch starter is faulty, causing the starter to stop working and cannot start. It is also possible that the starter relay is damaged, causing poor contact and preventing the starter from turning. to function normally. A fault occurs that prevents the vehicle from being started with the key, and in such a situation, in the first place. And it is also possible that the anti-theft device is working, causing the anti-theft device to lock without unlocking and starting the vehicle. In a situation like this, we must first check whether the key start switch is defective, remove the lower steering wheel guard plate, and check whether the plug is loose and oxidized. If there is no problem, we must remove it. The ignition head under the ignition switch. Insert the key into it to see if it can start by starting alone, that means theInternal wear of the ignition head is too great, leading to poor contact in this case. , you need to replace the ignition head to solve the problem. If it still does not work, you need to start the engine and check if there is a signal from the start relay when starting the engine. , it means that the relay is damaged and the start signal cannot reach the engine, causing the engine to stop running and cannot start the vehicle. In this case, the relay can be directly replaced to eliminate the fault.