Do not usefoam extinguishersto put out the fire if the generator catches fire.
Do not use foam extinguishers because they conduct electricity. If the equipment power is less than 150MW, it is recommended to use hydrogen cooling and air cooling. If it is 150MW, it is recommended to use water cooling. Water cooling is an independent circuit and has no direct contact with the windings and iron core. It is ducted and the windings and iron core can be cooled externally. When using this type of product, be sure to use it in an area 5 meters from burning objects to ensure personal safety. Of course, if it is a shorter range extinguisher, it can be used in an area of 2. meters. However, when using it, it is best to determine it based on the location.real uation on site, so that our personal safety can be guaranteed to the maximum.
Dry powder fire extinguishers cannot be used if this type of device catches fire.
Dry powder fire extinguishers cannot be used when a generator catches fire. The dry powder will produce water when melted at high temperature, causing secondary short circuit damage to circuit components and causing safety accidents such as electric leakage. Dry powder extinguishers cannot extinguish fires in high temperature environments and will intensify the intensity of the fire. They will produce dirt and oxides on the surface of the equipment and accelerate the aging of the equipment.