Installation of a diesel generator

The area around which the diesel generator set is installed should be kept clean, and objects that may produce corrosive gases and vapors such as acids and alkalis should be avoided nearby. Fire extinguishing devices should be equipped wherever possible. The generator box must have reliable protective earthing. For generators requiring direct grounding of the neutral point, the neutral grounding should be done by professionals and equipped with lightning protection devices. It is strictly forbidden to use the grounding device of the generator set. mains to directly earth the neutral point. The two-way switch with the mains must be very reliable to avoid reverse power transmission. The reliability of the two-way switch wiring must be inspected and approved by the selocal power supply. The installation place of the diesel generator set should be well ventilated, with sufficient air inlets on the generator side and good air outlets on the diesel engine side. The air outlet area should be more than 1.5 times larger than the water tank area. Older diesel generators must use concrete as a foundation, and a level must be used to measure the level during installation to ensure the unit is secured to a level foundation. There must be special anti-vibration pads or anchor bolts between the unit and the foundation. Modern diesel generators do not need concrete as a foundation, because modern diesel generators have been improved and the whole unit has a flat floor and is equipped with shock absorbers, which is very convenient. If used indoors, the smoke exhaust pipe must be routed outside. The dThe diameter of the pipe must be the diameter of the smoke outlet pipe from the silencer. The elbows of the connected pipes must not exceed 3 to ensure good flow of smoke evacuation. , and the pipe should be tilted downward 5-10 degrees to avoid rainwater injection; If the exhaust pipe is installed vertically upwards, a rain cover must be installed.