Question 1: What can you do with unwanted foam floor mats? Craft 1. A stunning illustration flower basket
Prepare the following materials: 2 rectangular foam blocks Dimensions: 24 cm (length) x 16 cm (width) x height 5 cm, decorative lace, 1 piece of green decorative paper, 1 piece of purple silk fabric, calendar paper, 1 piece of pink cellophane, wire, scissors, glue gun, knife, decorative flowers
1. Use a glue gun foam glue. Glue two rectangular foam blocks together to form a whole block. Cut soft, natural arcs on all 4 edges of the foam blocks. Cut out green decorative paper and glue it to the decorative blue mouth of the basket. of calendar paper on the other parts of the basket. For the foam part, cut off the excess part. 2. Then cut out the pink cellophane paper and stick it around the basket. 3. Then use a s-clothgoose to wrap it tightly around the basket, and after gluing it flat, cut off the excess 4. You can cut decorative lace to cover the interface between the silk fabric and the opening of the basket. Cut a long decorative lace and glue it diagonally to the surface of the basket. 5. According to your own needs, use iron wire to cut out a suitable basket handle according to your preferences, wrap the iron wire with decorative lace and stick it firmly. Tips for household treasures: Leave 2 cm at both ends of the wire to make it easier to attach the handle part.
6. Apply glue to the end of the 2 cm wire and insert it into the foam block. Insert flowers or various decorative flowers underneath. Use scrap foam board to create a beautiful decorative basket.
2. Decorating DIY letters with foam cardboard
Decorating DIY letters with cardboardn foam requires tools: letter foam board, quick-drying glue, colored wrapping paper, pen, and scissors.
1. Use a pen to trace the outline of the letter foam board on the back of the colored wrapping paper.
2. Use scissors to cut the letter wrapping paper.
3. Use quick-drying glue to glue the cut-out letter wrapping paper to the corresponding letter foam board.
4. Done.
Question 2: What small crafts can be made with foam board (step by step) Polystyrene foam board, also known as foam board and EPS panel, is made of volatile liquid foam. agents.Expandable polystyrene beads are white objects that are heated and formed in a mold after being pre-expanded by heating. They have the structural characteristics of fine ceclosed cells and are mainly used for building walls, roof insulation, composite panel insulation, cold rooms. , and air conditioning. , vehicles, ships, thermal insulation, floor heating, decoration and engraving, etc. are very widely used
As far as I know, its advantages lie in building insulation, but other characteristics are not good, such as being fragile and falling easily, the resistance is very low and it is easy to break even under a small force. It's not easy to do small DIY projects. I've only seen small benches made by craftsmen using a few pieces of foam board and tape. In terms of processing, it is very simple, because its material is relatively easy to cut and you can use a saw blade or a knife.
I don't know if this will help you, but I still think that if you wantIf you are doing a little DIY, you should change materials, such as extruded cardboard.
Question 3: What crafts can be made with the foam in the box? It depends on what type of foam it is. Let me show you some photos about using waste foam. You can combine them with your own creativity to transform them.
A cut flower made of foam.
The foam board can be used to store jewelry, and also can be made into small pins to insert into it, etc.
It's better, practical and beautiful, you can customize it according to your own preferences. Arrange the positions and colors of the foam boards.
Question 4: What crafts can be made with foam? You can practice carving by playing with it, but if you're serious, just add plaster to the exterior, which is inexpensive. .
Question 5: What can you do with foam? Handmade foam cutting combinations are very simple, provided you have a toothless saw and a cutting machine, but so are the measuring tools. essential. You can cut and assemble whatever you want. You can simply connect toothpicks and bamboo skewers. If the process is complex and precise, you can use glass glue for bonding. Do not use glue that is too corrosive. As for what you can do, you can find a few reasons and it depends on your interest.
Question 6: What can you do with cardboard and foam? Handmade, eco-friendly foam sculptures
Question 7: One piece? white foam What can you do with paper? Can it be made by hand? The materials needed to make handmade flowers with paperfoam: foam paper, polymer clay or light clay, aluminum wire, scissors, glue, crepe paper and white latex. Detailed steps on how to use foam paper to make crafts: 1. Use scissors to cut the foam paper into a heart shape, use light clay or soft clay to poke some small dots and insert them at the end of the aluminum wire.
2. Follow the DIY production sequence below to transform the light clay and heart-shaped foam paper into a crow's foot flower shape.
3. Cut paper sheets.
4. Use white latex to glue the paper cut leaves to the aluminum wire, and wrap the aluminum wire with green crepe paper to make green branches.
5. Use crepe paper to attach the flowers, branches and leaves of the foam paper crow's foot together.
6. Handmade foam paper flowersn thus produced can be decorated on the surface of many handicrafts.
Question 8: How to make a simple handmade foam boat model 1. Make the bottom of the boat: Use a knife to cut a large piece of foam into shape to ship, then use a knife to hollow out the middle.
2. Make a cabin: Use a knife to cut 2 rectangular pieces of foam and use toothpicks to connect them together.
3. Make a red flag: Cut two small red pieces. flags.
4. Make guardrails: Use 20 toothpicks to make the boat guardrails, insert the toothpicks evenly and apply double-sided tape on the toothpicks.
5. Make a stair railing: Use toothpicks and double-sided tape to make a stair railing.
6. Color.
Question 9: What can we do withthe foam ? Handmade polystyrene foam board, also known as foam board, EPS board is made of expandable polystyrene containing volatile liquid ethylene beads. are white objects that are heated and formed in a mold after being heated and pre-expanded. They have the structural characteristics of fine closed cells and are mainly used for building walls, roof insulation, composite panel insulation, cold rooms, air conditioners and vehicles. , and ships. It has a wide range of uses such as thermal insulation, floor heating, decoration and engraving
As far as I know, its advantages lie in building insulation, but its other characteristics are not good, such as being fragile and falling easily, and its strength is very low. It is easy to break even under moderate force. It's notIt's easy to do small DIY projects. I've only seen small benches made by craftsmen using a few pieces of foam board and tape. In terms of processing, it is very simple, because its material is relatively easy to cut and you can use a saw blade or a knife.
I don't know if this will help you, but I still think you need to do some small tinkering or change materials, like extruded boards.
Question 10: What is the best way to cut foam when crafting? How to cut? Please advise us, thank you. Use a sharp knife. Foam is fragile and it is best to cut it carefully.
Will floor foam board absorb blood?
1. Beautifully illustrated flower basket
Prepare the following materials: 2 rectangular foam blocks, size: 24 cm (length) x 16 cm (width) x 5 cm height,decorative lace, 1 piece of green decorative paper, 1 piece of purple silk fabric, calendar paper, 1 piece of pink cellophane, wire, scissors, glue gun, knife, decorative flowers
1. Use a foam glue gun to glue two rectangular foam blocks together to form a whole block. Cut the four edges of the foam block to create a soft and natural shape, cut the green decorative paper and stick it on the decorative blue mouth of the basket, stick two pieces of calendar paper on the other foam parts. from the basket and cut off the excess
2. Next, cut the pink cellophane paper. Glue it around the basket. Note that the four arc corners of the basket should be smooth.
3. Then wrap the basket tightly with silk cloth. After gluing it flat, cut off the excess part.
4. mouth, then cut a long decorative lace and stick it diagonally on the surfacebasket face
5. Use iron wire to cut out a suitable basket handle according to your own preferences, wrap the iron wire with decorative paper. lace and stick it firmly. Tips for making a baby: Leave 2cm at both ends of the wire to make it easier to attach the handle.
6. Apply glue to the end of the 2cm wire and insert it into the foam block. Insert flowers or various decorative flowers underneath. Use scrap foam board to create a beautiful decorative basket.
2. DIY foam board lettersDecoration
Tools needed for decorating DIY letters with homemade foam boards: foam letter boards, quick-drying glue, colored wrapping paper, pens and scissors.
1. Use a pen to trace the outline of the foam board on the back of the colored wrapping paper.
2. Use scissors to cut the wrapping paperhe letters.
3. Use quick-drying glue to adhere the cut-out letter wrapping paper to the corresponding foam board.
4. Finished.
No, but it is harmful to the body.
For plastic foam puzzle floor mats, you should choose regular shopping malls and manufacturers to avoid purchasing secondary foam "junk plastic". After purchase, it should be ventilated to dissipate odors before use. After contact with such products, you should wash your hands frequently to reduce accidental inhalation and ingestion. As soon as skin, respiratory or other symptoms appear, consult a doctor promptly.
The sale of plastic foam puzzle floor mats has been banned in Belgium and France. The reason is that a foaming agent called formamide is added during the production process of this floor mat, which is toxic. It can causeirritation to the skin, eyes and respiratory tract of infants and young children, and may even cause harm.
Formamide: Also known as aminoformaldehyde, it is a colorless, transparent oily liquid with a slight ammonia odor and is a low-toxic compound. EVA and PE are themselves non-toxic materials. However, in the production of foam floor mats, in order to foam, expand and soften the plastic, formamide is often used.
As a foaming agent. In particular, in order to reduce costs, some small manufacturers use recycled plastics for reprocessing and have to foam them again, and use larger doses of foaming agents such as formamide.
Formamide is irritating to the skin and eyes and can enter the human body through the skin and respiratory tract, damaging the blood and nervous system
. Furthermore, the forummamide is volatile and can release ammonia gas, which can stimulate the human body to produce symptoms such as watery eyes, coughing, and difficulty breathing.