The integrated underground tank pump is mainly composed of BDF prefabricated fire water tanks, complete sets of fire protection equipment pump rooms, fire protection systems and sewerage systems.
The top plate of the underground pump integrated fire water tank is 3.0mm galvanized steel plate, and the bottom plate and side plates are 3.4mm (made of 0.4mm stainless steel and 3.0mm galvanized steel plate). The plates are all stamped and formed in one go. Hot-dip galvanized steel pipes are used inside to fix the water tank. The pump room section must be reinforced accordingly.
Underground pump integrated fire water tanks are divided into those without bottom plates and those with bottom plates, a concrete platform is used to replace the bottom plate of the tankir of water.
How to calculate the price of BDF groundwater tank?
FRP combined water tanks can be used as underground water tanks, but as the strength of FRP combined water tanks is lower, when you consider using of FRP combined water tanks as underground water tanks, you should consider the following points
1: Underground water tanks should be thickened and thickened according to the conditions of use actual, which are different from the configuration of above ground water tanks, so they must be purchased from a qualified professional. manufacturers
2: The top of the water tank must be covered with soil within 50CM, and only turf can be laid, and cars or people cannot pass
3: The length and width of the water tank should not be too large; the overall size of the water tank does notit not be too large
4: High temperature water and industrial wastewater cannot be filled into the water tank
5: Once the tank is filled If underground water is covered with earth, protective fences should be installed around the water tank, and warning signs should be installed to prevent people from stepping on it.
Dezhou Huili Water Tank Co. , Ltd.
Shanxi Fiberglass Combined Underground Water Tank
The price of BDF underground water tank is calculated according to the following conditions:
1. Water tank specifications (length × width × height)
2. Water tank plates and accessories (thin or thick);
3. Lower channel steel foundation (water tank Different specifications (different models of steel channels);
4. Installation cost (installation location: roof or basement?)
p>
5. Freight (where is the destinationion?)